USB-C phone breathalyzer
claynicholson·copper-kicad-mcp·bench/route/corpus/phone_breathalyzer/phone_breathalyzer.kicad_pcb
About the USB-C phone breathalyzer PCB
USB-C phone breathalyzer is an open source STM32 PCB design by claynicholson, published on GitHub under the MIT license. It is a 2-layer board measuring 22 × 48 mm, with 26 components from 16 distinct parts.
Its main chip is the STM32F042F6P6TR, from the STM32 family. Other key parts include the XC6206P332MR-G, MQ-3B and USBLC6-2SC6. By type, the board carries 10 capacitors, 8 resistors, 4 ICs, 1 transistor, 1 connector and 1 switch.
From the project
MCP server that lets any AI app design real, orderable KiCad boards: schematic, LCSC parts, PCB routing, ERC/DRC, JLCPCB fab files.
Objective scoring of a PCB autorouter on real, human-routed KiCad boards (plus two synthetic stress cases). KiCad itself is the judge: completion and DRC come from kicad-cli pcb drc on the routed board, length / vias / widths from pcbnew. Nothing a router reports about itself is trusted for the score.
Boards can be run in parallel in separate processes (one --board each); every process rewrites the summary from the per-board files, so finish with --summarize.
Main components on the USB-C phone breathalyzer
USB-C phone breathalyzer bill of materials (BOM)
26 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F042F6P6TR STM32F042F6P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | XC6206P332MR-G Torex Semicon | SOT-23-3 | U2 |
| 1 | MQ-3B | MQ-3B_drill1.3 | U3 |
| 1 | USBLC6-2SC6 GOODWORK | SOT-23-6 | U4 |
| 1 | AO3400A Alpha Omega Semicon | SOT-23 | Q1 |
| 1 | TYPE-C-31-G-03 Korean Hroparts Elec | USB-C-SMD_TYPE-C-31-G-03_edge | J1 |
| 1 | TS-1187A-B-A-B XKB Connection | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1 |
| 1 | KT-0805G LED green Hubei KENTO Elec | LED_0805_2012Metric | D1 |
| 2 | CL10A475KO8NNNC 4.7uF Samsung Electro Mechanics | C_0603_1608Metric | C1, C5 |
| 3 | CL10A105KB8NNNC 1uF Samsung Electro Mechanics | C_0603_1608Metric | C2, C3, C7 |
| 5 | CC0603KRX7R9BB104 100nF YAGEO | C_0603_1608Metric | C4, C6, C8, C9, C10 |
| 1 | 0603WAF5101T5E 5.1k UNI ROYAL Uniroyal Elec | R_0603_1608Metric | R1 |
| 2 | 0603WAF1002T5E 10k UNI ROYAL Uniroyal Elec | R_0603_1608Metric | R2, R8 |
| 1 | 0603WAF1000T5E 100R UNI ROYAL Uniroyal Elec | R_0603_1608Metric | R3 |
| 3 | 0603WAF1003T5E 100k UNI ROYAL Uniroyal Elec | R_0603_1608Metric | R4, R5, R6 |
| 1 | 0603WAF1001T5E 1k UNI ROYAL Uniroyal Elec | R_0603_1608Metric | R7 |
USB-C phone breathalyzer design files
The KiCad project lives in the claynicholson/copper-kicad-mcp repository on GitHub; these links point at the commit this page was built from.
USB-C phone breathalyzer: common questions
What microcontroller does the USB-C phone breathalyzer use?
The USB-C phone breathalyzer is built around the STM32F042F6P6TR, from the STM32 family.
How big is the USB-C phone breathalyzer PCB?
The USB-C phone breathalyzer measures 22 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-C phone breathalyzer?
26 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB-C phone breathalyzer design files?
From the claynicholson/copper-kicad-mcp repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the USB-C phone breathalyzer design in my own project?
Yes, under the terms of its MIT license, which claynicholson chose for the repository.
Can I test firmware for the USB-C phone breathalyzer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in copper-kicad-mcp
ESP32
One air max
claynicholson
99.5 × 72 mm197 parts4LMIT102Coldfire
claynicholson
157.5 × 91.4 mm157 parts4LMIT102RP2040/RP2350
TinyTapeout 4+ Demoboard
claynicholson
104.5 × 81 mm131 parts4LMIT102Multichannel mixer
claynicholson
110 × 111 mm114 parts2LMIT102Stickhub
claynicholson
16.5 × 40 mm89 parts2LMIT102Raspberry Pi
CM5 MINIMA
claynicholson
61.2 × 64.2 mm70 parts6LMIT102Actionneur piezo
claynicholson
100.7 × 80 mm68 parts2LMIT102SERIAL PIC PROGRAMMER
claynicholson
160 × 99.1 mm55 parts2LMIT102Sonde xilinx
claynicholson
80.4 × 43.2 mm25 parts2LMIT102Interf u
claynicholson
115.6 × 108.2 mm23 parts2LMIT102Ecc83
claynicholson
52.1 × 46.4 mm11 parts2LMIT102
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k