Sky meter
cliffanet·sky-meter·hw/sky-meter.kicad_pcb
About the Sky meter PCB
Sky meter is an open source STM32 PCB design by cliffanet, published on GitHub. It is a 2-layer board measuring 81.9 × 48.5 mm, with 68 components from 39 distinct parts.
Its main chip is the STM32F411CEUx, from the STM32 family. Other key parts include the BMP280, ME6216A33XG and MCP73831. By type, the board carries 23 capacitors, 22 resistors, 6 connectors, 4 ICs, 4 diodes and 3 transistors.
From the project
Инструмент для парашютиста - простой высотомер на базе барометра.
Инструмент для парашютиста - простой высотомер на базе барометра.
измерять высоту; определять начала подъёма и начало прыжка; * писать в логбук историю прыжков: время взлёта, высота отделения, высота раскрытия;
Исходники - где, что лежит, права на использование, помощь при компиляции. Где скачать
- повышенное энергопотребление в спящем режиме (850 мкА)
В первой аппаратной версии применялся чип stm32f473 и энергопотребление всего устройства на его основе удалось снизить до 125 мкА, а в выключенном - до 85-90 мкА. И это при заявленных в документации 56 мкА (что-то дополнительно подребляет и…

Main components on the Sky meter
Sky meter bill of materials (BOM)
68 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F411CEUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U11 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U21 |
| 1 | ME6216A33XG | SOT-23 | U51 |
| 1 | MCP73831 | SOT-23-5 | U61 |
| 2 | ML2502 | SOT-23 | Q31, Q61 |
| 1 | ML5203 | SOT-23 | Q41 |
| 1 | XTAL3225 25MHz | XTAL_TSX-3225_16.0000MF18X-AC3 | Y11 |
| 1 | NX3215SA 32.768K | XTAL_NX3215SA-32.768K-STD-MUA-14 | Y12 |
| 1 | SWD | Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | J11 |
| 1 | display | TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | J31 |
| 1 | ~ | display-128x64 | J32 |
| 1 | SDCARD | Conn_uSDcard | J41 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J51 |
| 1 | battery | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J61 |
| 1 | btn-up | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW11 |
| 1 | btn-sel | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW12 |
| 1 | btn-down | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW13 |
| 1 | 1N5819 | D_SOD-323 | D11 |
| 1 | red | LED_0603_1608Metric | D61 |
| 1 | blue | LED_0603_1608Metric | D62 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | chrg | LED_0603_1608Metric | D68 |
| 1 | 1kΩ | L_0603_1608Metric | FB51 |
| 2 | 1.5pF | C_0603_1608Metric | C11, C12 |
| 2 | 8pF | C_0603_1608Metric | C13, C14 |
| 2 | 330μF | CP_EIA-7343-20_Kemet-V | C15, C53 |
| 1 | 2.2μF | C_0603_1608Metric | C16 |
| 4 | 10μF | C_0603_1608Metric | C21, C43, C52, C61 |
| 6 | 1μF | C_0603_1608Metric | C31, C32, C33, C58, C62, C64 |
| 2 | 4.7μF | C_0603_1608Metric | C51, C63 |
| 4 | 100nF | C_0603_1608Metric | C54, C55, C56, C57 |
| 5 | 10k | R_0603_1608Metric | R11, R12, R13, R14, R15 |
| 1 | 250 | R_0805_2012Metric | R31 |
| 3 | 510 | R_0603_1608Metric | R32, R41, R63 |
| 3 | 100k | R_0603_1608Metric | R33, R42, R64 |
| 2 | 4k7 | R_0603_1608Metric | R43, R65 |
| 5 | 5k1 | R_0603_1608Metric | R51, R52, R66, R67, R68 |
| 1 | 3k3 | R_0603_1608Metric | R61 |
| 1 | 0 | R_0603_1608Metric | R62 |
| 1 | 100k | R_Array_Convex_4x0603 | RN61 |
Sky meter design files
The KiCad project lives in the cliffanet/sky-meter repository on GitHub; these links point at the commit this page was built from.
- Layouthw/sky-meter.kicad_pcb
- Schematichw/sky-meter.kicad_sch
Sky meter: common questions
What microcontroller does the Sky meter use?
The Sky meter is built around the STM32F411CEUx, from the STM32 family.
How big is the Sky meter PCB?
The Sky meter measures 81.9 × 48.5 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the Sky meter?
68 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sky meter design files?
From the cliffanet/sky-meter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sky meter design in my own project?
The repository has no license, so all rights stay with cliffanet. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sky meter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k