TinyGs-CA
ClubAeroespacial·TinyGs-CA·placa/Version2.kicad_pcb
About the TinyGs-CA PCB
TinyGs-CA is an open source ESP32 PCB design by ClubAeroespacial, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 31 components from 16 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4(4MB), from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 11 resistors, 10 capacitors, 2 ICs, 2 transistors, 2 connectors and 2 switches.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
Bring-up y validación de la revisión Version2 de la placa. Módulos: ESP32-C3-WROOM-02-N4 (4 MB) + módulo SX1278 de 433 MHz con conector u.FL.
Bring-up y validación de la revisión Version2 de la placa. Módulos: ESP32-C3-WROOM-02-N4 (4 MB) + módulo SX1278 de 433 MHz con conector u.FL.
Estado: hardware validado. 5 unidades fabricadas (3 + 2), todas funcionando. Enlace LoRa bidireccional confirmado entre dos placas.
Verificado de dos formas independientes: extraído del netlist de KiCad (Version2.kicadpcb`) y confirmado con firmware que corre en la placa.
Main components on the TinyGs-CA
TinyGs-CA bill of materials (BOM)
31 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02-N4(4MB) | BULETM-SMD_ESPRESSIF_ESP32-C3-WROOM-02-N4-4MB | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U2 |
| 2 | MMBT3904-C20526 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q2, Q3 |
| 1 | Terminales programacion | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | WJ500V-5.08-2P-14-00A | CONN-TH_2P-P5.00_WJ500V-5.08-2P | P1 |
| 2 | TS-1187A-B-A-B | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1, SW2 |
| 1 | SX1278ATR4-GC | Sin título | SX1 |
| 1 | 17-21SUYC/TR8 | LED_0805_2012Metric | LED1 |
| 5 | 10uF | C_0805_2012Metric | C1, C2, C3, C6, C7 |
| 3 | 10nF | C_0402_1005Metric | C4, C5, C9 |
| 2 | 100nF | C_0402_1005Metric | C8, C10 |
| 2 | 10 | R_0603_1608Metric | R1, R3 |
| 1 | 100 | R_0603_1608Metric | R2 |
| 4 | 12K | R_0603_1608Metric | R4, R5, R6, R8 |
| 2 | 470 | R_0603_1608Metric | R7, R9 |
| 2 | 10k | R_0603_1608Metric | R10, R11 |
TinyGs-CA design files
The KiCad project lives in the ClubAeroespacial/TinyGs-CA repository on GitHub; these links point at the commit this page was built from.
- Layoutplaca/Version2.kicad_pcb
- Schematicplaca/Version2.kicad_sch
TinyGs-CA: common questions
What microcontroller does the TinyGs-CA use?
The TinyGs-CA is built around the ESP32-C3-WROOM-02-N4(4MB), from the ESP32 family.
How big is the TinyGs-CA PCB?
The TinyGs-CA measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TinyGs-CA?
31 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the TinyGs-CA design files?
From the ClubAeroespacial/TinyGs-CA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TinyGs-CA design in my own project?
The repository has no license, so all rights stay with ClubAeroespacial. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TinyGs-CA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k