ELS Interface

Clumsy-old-boy·ELS_Interface

ELS Interface PCB layout, top view — open source board by Clumsy-old-boy

About the ELS Interface PCB

ELS Interface is an open source PCB design by Clumsy-old-boy, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 70 mm, with 50 components from 26 distinct parts.

Other key parts include the M24M01E-FMN6TP, TPS5430DDAR, TXB0104PWR and PC817C(TOKMAS). By type, the board carries 19 resistors, 15 capacitors, 6 ICs, 5 diodes, 2 fuses and 2 LEDs.

It belongs with the dev boards & breakouts, displays & leds and power & battery designs in this gallery.

From the project

A carrier board for the STM32G474RE (NUCLEO-G474RE) designed in KiCad 10, featuring 12V to 5V buck supply, isolated I/O, level shifting, and display interface.

ELSInterface is a KiCad shield for the NUCLEO-G474RE (STMicroelectronics STM32G474RET6**, LQFP64). It plugs onto the two morpho headers of the Nucleo board and carries the machine-side interface of an electronic lead-screw (ELS) controller.

The board is a 2-layer design, 70 × 70 mm, 1 oz copper, routed and DRC-clean (0 active violations, 0 unconnected nets), with a fully filled copper pour on both sides.

Main components on the ELS Interface

M24M01E-FMN6TPTPS5430DDARTXB0104PWRPC817C(TOKMAS)

ELS Interface bill of materials (BOM)

50 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
M24M01E-FMN6TP
IC1
1
TPS5430DDAR
U1
1
TXB0104PWR
U2
3
PC817C(TOKMAS)
PC817C
U3, U4, U5
1
MF-MSMF110/16-2
F1
1
SMD1812P050TF/30
F2
1
LED_0805_GREEN
LED_0805_Green
LED1
1
LED_0805_RED
LED_0805_Red
LED2
2
SMBJ15A
D1, D3
1
SS34
D2
2
C8598
D_Schottky
D4, D5
1
FNR8065S220MT
22uH
L1
1
MA35V100M6X8
100uF 35V
C1
10
CC0603KRX7R9BB104
100nF
C2, C7, C8, C9, C10, C11, C12, C13 +2
1
TCC1210X7R226K250MT
22uF 25V
C3
1
08055C103KAT2A
10nF 50V
C4
1
6TPE220MAZB
220uF 6.3V
C5
1
CL31A106KBHNNNE
10uF 50V
C6
1
0402WGF1002TCE
10k
R1
1
CRCW04023K24FKED
3.24k
R2
Show 6 more
QtyPartRefs
5
0402WGF1001TCE
1K
R3, R5, R6, R7, R8
2
0402WGF1000TCE
100R
R4, R18
3
0603WAF0000T5E
0R
R9, R10, R11
3
0402WGF2200TCE
220R
R12, R13, R14
3
0402WGF4701TCE
4.7K
R15, R16, R17
1
0402WGF1000TCE
47R
R19

ELS Interface design files

The KiCad project lives in the Clumsy-old-boy/ELS_Interface repository on GitHub; these links point at the commit this page was built from.

ELS Interface: common questions

How big is the ELS Interface PCB?

The ELS Interface measures 70 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ELS Interface?

50 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ELS Interface design files?

From the Clumsy-old-boy/ELS_Interface repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ELS Interface design in my own project?

Yes, under the terms of its MIT license, which Clumsy-old-boy chose for the repository.

Similar boards