13 open source boards using the TXB0104PWR

Real designs built with the TXB0104PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the TXB0104PWR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TXB0104PWR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 2.2 µF).
  • The VCCB pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 2.2 µF).
  • The OE pin has a pull-up to 3.3V on 5 of 8 designs, most often 10 kΩ (then 47 kΩ).
VCCApin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 88% · 100 nF (7), 2.2 µF (1), 10 µF (1)
NCpin 6, 9Connected to: Not connected 100%
GNDpin 7Connected to: GND 100%
OEpin 8Connected to: Signal 75% · 3.3V 25%
  • Pull-up to 3.3V on 63% · 10 kΩ (3), 47 kΩ (1)
VCCBpin 14Connected to: 5V 88%
  • Decoupling capacitor on 75% · 100 nF (5), 2.2 µF (1), 10 µF (1)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MicroSD-module by colinleroy, Ethernet breakout W5500 by SolderedElectronics, Salus by Wetmelon and Cpm vehicle pcb by AaravG42.

The TXB0104PWR in open source designs

The gallery holds 13 open source boards using the TXB0104PWR from 8 GitHub repositories; a typical one measures about 65.1 × 54 mm and carries around 59 components.

92% are two-layer designs, the rest use four layers or more, and 77% carry an open source license.

The most starred is Mini-SMD-Angled by colinleroy.

Parts used alongside the TXB0104PWR

Microcontrollers on boards using the TXB0104PWR

TXB0104PWR: common questions

Where can I find a TXB0104PWR reference design?

Each of the 13 boards on this page is a real design using the TXB0104PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXB0104PWR VCCA pin?

The VCCA pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the TXB0104PWR.

What decoupling capacitors do designs use on the TXB0104PWR VCCB pin?

The VCCB pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the TXB0104PWR.

What pull-up resistor is used on the TXB0104PWR OE pin?

The OE pin has a pull-up to 3.3V on 5 of 8 designs, most often 10 kΩ (then 47 kΩ). Counted from the KiCad layouts of 8 open source designs using the TXB0104PWR.

Which microcontrollers do boards using the TXB0104PWR use?

Most are built on AVR/Arduino (3), FPGA (1) and NXP (1).

How big is a typical board using the TXB0104PWR?

The median is 65.1 × 54 mm, and 92% are two-layer designs.

What is the most popular open source board using the TXB0104PWR?

By GitHub stars, Mini-SMD-Angled by colinleroy, with 20 stars.

Can I simulate one of these boards using the TXB0104PWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part