遥控器
CodonNine·4-axis-aircraft·遥控器/遥控器.kicad_pcb
About the 遥控器 PCB
遥控器 is an open source STM32 PCB design by CodonNine, published on GitHub. It is a 2-layer board measuring 150 × 90.8 mm, with 63 components from 27 distinct parts.
Its main chip is the STM32F103RCTx, from the STM32 family. Other key parts include the SX1308, IPS_1.14_135X240_ST7789_13P顶层, ME6206A33M3G, 2.4G-UART and W25Q128JVS. By type, the board carries 22 capacitors, 13 switches, 10 resistors, 9 ICs, 5 connectors and 2 inductors.
From the project
四轴飞行器
Main components on the 遥控器
遥控器 bill of materials (BOM)
63 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SX1308 | SOT-23-6 | U1 |
| 1 | IPS_1.14_135X240_ST7789_13P顶层 | 1.14IPS-LCD | U2 |
| 1 | STM32F103RCTx | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | ME6206A33M3G | SOT-23 | U4 |
| 1 | 2.4G-UART | 2.4G-UART | U5 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U6 |
| 1 | ~ | SOP-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | 10k | 16x16 360度回中 | U8 |
| 1 | 10k | 摇杆16x16一字不回中 | U9 |
| 1 | 8M | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 4 | Conn_01x01_Pin | SolderWirePad_1x01_SMD_1x2mm | J3, J4, J5, J6 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J7 |
| 1 | SK12F14G5 | SW-TH_SK12F14G5 | SW1 |
| 10 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 +2 |
| 2 | SW_Push | SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW13, SW14 |
| 1 | D | D_SOD-123 | D1 |
| 1 | L | L_Chilisin_BMRA00040420 | L1 |
| 1 | 10R 100M | L_0603_1608Metric | L2 |
| 15 | 0.1u | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C8, C11 +7 |
| 2 | 22u | C_0603_1608Metric | C7, C9 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10u | C_0603_1608Metric | C10, C13, C16 |
| 2 | 22p | C_0603_1608Metric | C17, C18 |
| 2 | 150k | R_0603_1608Metric | R1, R4 |
| 1 | 1k | R_0603_1608Metric | R2 |
| 2 | 20.5k | R_0603_1608Metric | R3, R7 |
| 3 | 10k | R_0603_1608Metric | R5, R6, R8 |
| 2 | 4.7k | R_0603_1608Metric | R9, R10 |
遥控器 design files
The KiCad project lives in the CodonNine/4-axis-aircraft repository on GitHub; these links point at the commit this page was built from.
- Layout遥控器/遥控器.kicad_pcb
- Schematic遥控器/遥控器.kicad_sch
遥控器: common questions
What microcontroller does the 遥控器 use?
The 遥控器 is built around the STM32F103RCTx, from the STM32 family.
How big is the 遥控器 PCB?
The 遥控器 measures 150 × 90.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 遥控器?
63 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the 遥控器 design files?
From the CodonNine/4-axis-aircraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 遥控器 design in my own project?
The repository has no license, so all rights stay with CodonNine. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 遥控器 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k