HardLabs

FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard

CollinOlkows·FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard·raw_files/FD87.kicad_pcb

FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard PCB layout, top view — open source RP2040/RP2350 board by CollinOlkows

About the FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard PCB

FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard is an open source RP2040/RP2350 PCB design by CollinOlkows, published on GitHub. It is a 2-layer board measuring 355.6 × 119.1 mm, with 174 components from 10 distinct parts.

Its main chip is the Raspberry_Pi_Pico, from the RP2040/RP2350 family. By type, the board carries 84 diodes, 5 switches and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

Raspberry Pi Pico Powered TKL keyboard

The FD84 is my first PCB design. It is a TKL keyboard that uses a Raspberry Pi RP2040 (Pico) microcontroller. Using Fusion 360, I designed a top plate and a case. This case is a lower profile case but can easily be modifed to fit someones style preference. There is also 2 top plate files, the first has the cut outs for the stabliers being more exact while the 2nd enlarges them. I found that my stablizers had a bit to much pressure with the normal top plate but your miles may very. All 3mf files, along with the fusion files are provided in the case3dmodels folder. Finally the Pcb are provided…

Main components on the FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard

Raspberry_Pi_Pico

FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard bill of materials (BOM)

174 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Raspberry_Pi_Pico
U1
77
MX_SW_solder
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +69
2
MX_SW_solder
MX28, MX41
1
MX_SW_solder
MX45
4
MX_SW_solder
MX74, MX76, MX78, MX81
1
MX_stab
S1
2
MX_stab
S2, S3
1
MX_stab
S4
1
MX_stab
S5
84
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +76

FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard design files

The KiCad project lives in the CollinOlkows/FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard repository on GitHub; these links point at the commit this page was built from.

FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard: common questions

What microcontroller does the FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard use?

The FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard is built around the Raspberry_Pi_Pico, from the RP2040/RP2350 family.

How big is the FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard PCB?

The FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard measures 355.6 × 119.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard?

174 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard design files?

From the CollinOlkows/FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard design in my own project?

The repository has no license, so all rights stay with CollinOlkows. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FD84-Raspberry-Pi-Pico-Powered-TKL-Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards