PCB

conductive-brain·PCB·ORX_Lite_Receiver/hardware/ORX-LITE one-channel optical receiver/ORX-LITE one-channel optical receiver.kicad_pcb

PCB layout, top view — open source board by conductive-brain

About the PCB

PCB is an open source PCB design by conductive-brain, published on GitHub under the MIT license. It is a 4-layer board measuring 50 × 40 mm, with 40 components from 22 distinct parts.

Other key parts include the LP5907MFX-3.3, LP5907MFX-3.0, OPA365XXDBV and ADS7042XDCU. By type, the board carries 18 capacitors, 12 resistors, 5 ICs, 2 diodes, 2 inductors and 1 connector.

It belongs with the audio designs in this gallery.

From the project

PCB designs in KiCad. ORX_Lite_Receiver: a 4-layer one-channel optical receiver (S5971 photodiode, OPA365 TIA and Sallen-Key filter, ADS7042 12-bit 1 MSPS ADC over SPI); revision A designed, not yet fabricated.

A 4-layer board that measures light. A photodiode turns light into a small current, two op amps turn the current into a clean voltage, and a 12-bit ADC sends it as numbers, 1 million per second, over SPI to a 3.3 V microcontroller board (for example a Raspberry Pi Pico).

Power comes from the microcontroller board: 5 V and 3.3 V through the header.

I drew this board by hand in KiCad 9, one step at a time. Each step is one commit, and each commit message says what was added and why.

Main components on the PCB

PCB bill of materials (BOM)

40 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LP5907MFX-3.3
U1
1
LP5907MFX-3.0
U2
2
OPA365XXDBV
OPA365xxDBV
U3, U4
1
ADS7042XDCU
ADS7042xDCU
U5
1
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
J1
1
green
D1
1
S5971
D2
2
220R@100MHz
FB1, FB2
4
10U
10u
C1, C6, C7, C11
6
1u
C2, C3, C4, C5, C17, C18
4
100N
100n
C8, C9, C12, C15
1
10P
10p
C10
1
220P
220p
C13
1
100P
100p
C14
1
1.5N
1.5n
C16
2
1k
R1, R2
1
100K
100k
R3
1
2k
R4
2
10K
10k
R5, R12
2
4.99K
4.99k
R6, R7
Show 2 more
QtyPartRefs
1
22
R8
3
33
R9, R10, R11

PCB design files

The KiCad project lives in the conductive-brain/PCB repository on GitHub; these links point at the commit this page was built from.

PCB: common questions

How big is the PCB?

The PCB measures 50 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the PCB?

40 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB design files?

From the conductive-brain/PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB design in my own project?

Yes, under the terms of its MIT license, which conductive-brain chose for the repository.

Similar boards