Crimson veil
connythecreator·crimson-veil·bleed/bleed_parts_build.kicad_sch
About the Crimson veil PCB
Crimson veil is an open source PCB design by connythecreator, published on GitHub under the GPL-3.0 license. It is a board, with 37 components from 9 distinct parts.
Other key parts include the AD5933YRSZ, AD620AN, TL082ACP and MAX1044. By type, the board carries 20 resistors, 11 capacitors and 5 ICs.
It belongs with the power & battery designs in this gallery.
From the project
FM/SW for Project Crimson (ENG40011)
Software/firmware suite for Project Crimson (ENG40011) — a prehospital internal-bleeding detection device using EIT / bioimpedance.
The repository is the whole device, not a library: the analog front end and the enclosure round it, the ESP32 firmware, the Python suite that drives it, and the kiosk the operator uses. The suite is started by a single entrypoint.
Main components on the Crimson veil
Crimson veil bill of materials (BOM)
37 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD5933YRSZ | RS_16_ADI | U1 |
| 1 | AD620AN | DIP-8_W7.62mm_LongPads | U4 |
| 2 | TL082ACP | DIP-8_W7.62mm_LongPads | U5, U6 |
| 1 | MAX1044 | U8 | |
| 1 | 50k trimpot | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | RV1 |
| 7 | 0.1uF | C_0603_1608Metric | C2, C3, C4, C5, C6, C11, C18 |
| 4 | 10uF | C_0603_1608Metric | C12, C13, C17, C21 |
| 10 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R8, R13, R16, R17 +2 |
| 10 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7, R9, R10, R11, R12, R14, R15 +2 |
Crimson veil design files
The KiCad project lives in the connythecreator/crimson-veil repository on GitHub; these links point at the commit this page was built from.
Crimson veil: common questions
How many components are on the Crimson veil?
37 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Crimson veil design files?
From the connythecreator/crimson-veil repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Crimson veil design in my own project?
Yes, under the terms of its GPL-3.0 license, which connythecreator chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k