Tailwind bms
conroy-cheers·tailwind-bms
About the Tailwind bms PCB
Tailwind bms is an open source PCB design by conroy-cheers, published on GitHub. It is a 2-layer board measuring 39.1 × 25.1 mm, with 19 components from 16 distinct parts.
Other key parts include the AP2210N-3_3TRE1, AP7370-50FDC-7 and BQ25756RRVR. By type, the board carries 9 capacitors, 4 ICs, 4 resistors, 1 switch and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
14S BMS with integrated charger and 240W USB PD controller
Main components on the Tailwind bms
Tailwind bms bill of materials (BOM)
19 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | VQFN-32-1EP_4x4mm_P0.4mm_EP2.8x2.8mm_ThermalVias | U1 |
| 1 | AP2210N-3_3TRE1 | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U2 |
| 1 | AP7370-50FDC-7 | U-DFN2020-6_L2.0-W2.0-P0.65-BL-EP-1 | U3 |
| 1 | BQ25756RRVR | TQFN-36_L6.0-W5.0-P0.50-BL-EP-1 | U4 |
| 1 | LM5164DDAR | SO-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | S1 |
| 1 | 33uH, 144mR | L_Abracon_ASPI-4030S | L1 |
| 2 | 2.2uF | C_0603_1608Metric | C1, C8 |
| 1 | 2.2nF | C_0603_1608Metric | C2 |
| 1 | 47pF | C_0603_1608Metric | C3 |
| 1 | 1.2nF | C_0603_1608Metric | C4 |
| 1 | 4.7uF | C_0603_1608Metric | C5 |
| 3 | 1uF | C_0603_1608Metric | C6, C7, C9 |
| 1 | 17.8k | R_0603_1608Metric | R1 |
| 1 | 237k | R_0603_1608Metric | R2 |
| 1 | 442k | R_0603_1608Metric | R3 |
| 1 | 90.9k | R_0603_1608Metric | R4 |
Tailwind bms design files
The KiCad project lives in the conroy-cheers/tailwind-bms repository on GitHub; these links point at the commit this page was built from.
- Layouttailwind-bms.kicad_pcb
- Schematictailwind-bms.kicad_sch
Tailwind bms: common questions
How big is the Tailwind bms PCB?
The Tailwind bms measures 39.1 × 25.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tailwind bms?
19 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tailwind bms design files?
From the conroy-cheers/tailwind-bms repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tailwind bms design in my own project?
The repository has no license, so all rights stay with conroy-cheers. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k