USB-C-PD-Trigger
coolachlanke·USB-C-PD-Trigger·hardware/pdtrigger.kicad_pcb
About the USB-C-PD-Trigger PCB
USB-C-PD-Trigger is an open source STM32 PCB design by coolachlanke, published on GitHub. It is a 4-layer board measuring 56 × 53 mm, with 81 components from 26 distinct parts.
Its main chip is the STM32F401RBT6, from the STM32 family. Other key parts include the CYPD3177-24LQXQ, C474881 and SY8303AIC. By type, the board carries 32 resistors, 26 capacitors, 9 diodes, 4 ICs, 3 connectors and 2 transistors.
It belongs with the power & battery designs in this gallery.
From the project
CYPD3177-based USB-C power delivery trigger with STM32F401 for power profile selection.
- USB-C Input - Receptacle with differential pair routing for DFU support - CYPD3177 PD sink controller with I2C interface to MCU - Default PDO profile via resistor divider
- Microcontroller - STM32F401RBT6 - SWD header for programming/debugging - USB DFU capability for easy firmware flashing - I2C communication with PD controller
- User Interface - Single pushbutton to cycle through PDOs - 5x yellow indicator LEDs for 5 V, 9 V, 12 V, 15 V, 20 V

Main components on the USB-C-PD-Trigger
USB-C-PD-Trigger bill of materials (BOM)
81 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401RBT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | CYPD3177-24LQXQ | TQFN-24_L4.0-W4.0-P0.50-TL-EP2.8 | U2 |
| 1 | C474881 TERM_BLK | CONN-TH_P5.00_KF301-5.0-2P | U3 |
| 1 | SY8303AIC | TSOT-23-8_L2.9-W1.6-P0.65-LS2.8-BR | U4 |
| 1 | DMP3098LSD-13 | SO-8_L4.9-W3.9-P1.27-LS5.9-BL | Q1 |
| 1 | C8545 NMOS | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q3 |
| 1 | 16MHZ 16MHz | OSC-SMD_4P-L3.2-W2.5-BL | Y1 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | HDR-TH_4P-P2.54-V-M | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | NEW_USB-C-SMD_TYPE-C-6PIN-2MD-073 | J2 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | HDR-TH_2P-P2.54-V-M | J3 |
| 1 | C92658 SW_SPDT | SW-SMD_K3-1280S-K1 | SW1 |
| 1 | SW_Push | SW-SMD_L3.9-W3.0-P4.45 | SW2 |
| 1 | TestPoint | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3 |
| 2 | C84256 RED | LED_0805_2012Metric | D1, D2 |
| 5 | C2296 YEL | LED_0805_2012Metric | D3, D4, D5, D6, D7 |
| 2 | USBLC6-2P6 | SOT-666-6_L1.6-W1.2-P0.50-LS1.6-BR | D8, D9 |
| 1 | 47U 47u | IND-SMD_L7.3-W7.3 | L1 |
| 12 | 100N 100n | C_0402_1005Metric | C1, C3, C4, C5, C6, C7, C8, C13 +4 |
| 10 | 4.7U 4.7u | C_0805_2012Metric | C2, C9, C12, C14, C17, C19, C20, C21 +2 |
| 3 | 10P 10p | C_0402_1005Metric | C10, C11, C25 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1u | C_0402_1005Metric | C26 |
| 17 | 2K2 2k2 | R_0603_1608Metric | R1, R3, R4, R5, R6, R7, R8, R9 +9 |
| 1 | 10K 10k | R_0402_1005Metric | R2 |
| 1 | DNP | R_0603_1608Metric | R10 |
| 8 | 20K 20k | R_0603_1608Metric | R11, R17, R21, R22, R23, R24, R25, R27 |
| 5 | 1K5 1k5 | R_0402_1005Metric | R28, R29, R30, R31, R32 |
USB-C-PD-Trigger design files
The KiCad project lives in the coolachlanke/USB-C-PD-Trigger repository on GitHub; these links point at the commit this page was built from.
USB-C-PD-Trigger: common questions
What microcontroller does the USB-C-PD-Trigger use?
The USB-C-PD-Trigger is built around the STM32F401RBT6, from the STM32 family.
How big is the USB-C-PD-Trigger PCB?
The USB-C-PD-Trigger measures 56 × 53 mm, has 4 copper layers and is 1.565 mm thick.
How many components are on the USB-C-PD-Trigger?
81 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-C-PD-Trigger design files?
From the coolachlanke/USB-C-PD-Trigger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-C-PD-Trigger design in my own project?
The repository has no license, so all rights stay with coolachlanke. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the USB-C-PD-Trigger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k