3 open source boards using the STM32F401RBT6
Real designs built with the STM32F401RBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ducker-Charger
Angelussss
66.4 × 163.6 mm256 parts4LCC-BY-NC-4.018STM32
Node
stustanet
75 × 87 mm99 parts2LNo license5STM32
USB-C-PD-Trigger
coolachlanke
56 × 53 mm81 parts4LNo license0
The STM32F401RBT6 in open source designs
The gallery holds 3 open source boards using the STM32F401RBT6 from 3 GitHub repositories; a typical one measures about 66.4 × 87 mm and carries around 99 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is Ducker-Charger by Angelussss.
Microcontrollers on boards using the STM32F401RBT6
What boards using the STM32F401RBT6 are built for
STM32F401RBT6: common questions
Where can I find a STM32F401RBT6 reference design?
Each of the 3 boards on this page is a real design using the STM32F401RBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F401RBT6 use?
Most are built on STM32 (3).
How big is a typical board using the STM32F401RBT6?
The median is 66.4 × 87 mm, and 33% are two-layer designs.
What is the most popular open source board using the STM32F401RBT6?
By GitHub stars, Ducker-Charger by Angelussss, with 18 stars.
Can I simulate one of these boards using the STM32F401RBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.