8 open source boards using the CYPD3177-24LQXQ

Real designs built with the CYPD3177-24LQXQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the CYPD3177-24LQXQ

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the CYPD3177-24LQXQ connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCD pin has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 4.7 µF).
  • The VDDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 1 µF).
  • The DNU1 pin is left unconnected on 8 of 8 designs.
  • The DNU2 pin is left unconnected on 8 of 8 designs.
VBUS_FET_ENpin 3Connected to: Signal 50% · VBUS_FET_EN 38%
  • Series resistor on 38% · 1 kΩ (3)
SAFE_PWR_ENpin 4Connected to: Not connected 63% · a signal 38%
ISNK_COARSEpin 5Connected to: Signal 100%
  • Pull-up to 3.3V on 75% · 5.1 kΩ (2), 10 kΩ (1), 5 kΩ (1)
  • Resistor to GND on 75% · 5.1 kΩ (1), 10 kΩ (1), 5 kΩ (1)
ISNK_FINEpin 6Connected to: Signal 63% · GND 38%
  • Pull-up to 3.3V on 63% · 5 kΩ (1), 0 Ω (1)
  • Resistor to GND on 63% · 0 Ω (2), 1 kΩ (1), 2.2 kΩ (1)
HPI_INTpin 7Connected to: Not connected 63% · a signal 38%
GPIO_1pin 8Connected to: Not connected 75% · a signal 25%
FAULTpin 9Connected to: Signal 88%
  • Resistor to GND on 75% · 100 kΩ (2), 110 kΩ (1), 10 kΩ (1)
FLIPpin 10Connected to: Signal 88%
  • Pull-up to 3.3V on 63% · 4.7 kΩ (2), 2 kΩ (1), 2.2 kΩ (1)
VDC_OUTpin 11Connected to: Signal 63% · VCC 25%
  • Capacitor to GND on 63% · 4.7 µF (5), 1 µF (3), 100 nF (3)
  • Series resistor on 50% · 10 mΩ (2), 34 kΩ (2), 100 kΩ (1)
  • Series capacitor on 50% · 1 µF (3), 100 nF (1)
HPI_SDApin 12Connected to: The microcontroller 38% · not connected 38%
  • Pull-up to 3.3V on 50% · 2.2 kΩ (2), 2 kΩ (1)
HPI_SCLpin 13Connected to: The microcontroller 38% · not connected 38%
  • Pull-up to 3.3V on 50% · 2.2 kΩ (2), 2 kΩ (1)
D-pin 16Connected to: Not connected 88%
D+pin 17Connected to: Not connected 88%
VBUS_INpin 18Connected to: VBUS 75% · a signal 25%
  • Capacitor on 38% · 1 µF (2)
  • Decoupling capacitor on 38% · 100 nF (2), 1 µF (1), 3.3 µF (1)
GNDpin 19, 22, 25Connected to: GND 100%
DNU1pin 20Connected to: Not connected 100%
DNU2pin 21Connected to: Not connected 100%
VDDDpin 23Connected to: 3.3V 75% · a signal 25%
  • Decoupling capacitor on 88% · 100 nF (12), 1 µF (4), 4.7 µF (1)
VCCDpin 24Connected to: 1.8V 50% · a signal 50%
  • Decoupling capacitor on 100% · 1 µF (6), 4.7 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Oculink pcie adapter by antmicro, MainPCB by LEDs-by-glowingkitty, Testboard by Brickteam-RO and Sirith pico by winedarksea.

The CYPD3177-24LQXQ in open source designs

The gallery holds 8 open source boards using the CYPD3177-24LQXQ from 8 GitHub repositories; a typical one measures about 95.9 × 74.3 mm and carries around 122 components.

88% use four copper layers or more, and 63% carry an open source license.

The most starred is Oculink pcie adapter by antmicro.

Microcontrollers on boards using the CYPD3177-24LQXQ

What boards using the CYPD3177-24LQXQ are built for

CYPD3177-24LQXQ: common questions

Where can I find a CYPD3177-24LQXQ reference design?

Each of the 8 boards on this page is a real design using the CYPD3177-24LQXQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the CYPD3177-24LQXQ VCCD pin?

The VCCD pin has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the CYPD3177-24LQXQ.

What decoupling capacitors do designs use on the CYPD3177-24LQXQ VDDD pin?

The VDDD pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the CYPD3177-24LQXQ.

How is the CYPD3177-24LQXQ DNU1 pin connected?

The DNU1 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the CYPD3177-24LQXQ.

Which microcontrollers do boards using the CYPD3177-24LQXQ use?

Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the CYPD3177-24LQXQ?

The median is 95.9 × 74.3 mm, and 13% are two-layer designs.

What is the most popular open source board using the CYPD3177-24LQXQ?

By GitHub stars, Oculink pcie adapter by antmicro, with 20 stars.

Can I simulate one of these boards using the CYPD3177-24LQXQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part