8 open source boards using the SY8303AIC
Real designs built with the SY8303AIC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Core
Hive-RSI-Lab
120 × 100 mm297 parts4LMIT0STM32
USB-C-Portable-PSU
Ng-Chen-Xuan
58 × 58 mm151 parts4LCERN-OHL-S-2.00STM32
Zero star
Auodit
38 × 38 mm127 parts4LCC-BY-SA-4.00AVR/Arduino
Octobot
Deivid-Negoita
124 × 23 mm120 parts4LMIT0STM32
USB-C-PD-Trigger
coolachlanke
56 × 53 mm81 parts4LNo license0Usb pd buck converter
bernardopezzo215.3 × 30.1 mm20 parts2LNo license0Pd buck converter
bernardopezzo
215.3 × 30.1 mm20 parts2LNo license0STM32
Zero star rounded
Auodit
38 × 38 mm110 parts4LCC-BY-SA-4.00
How designs wire the SY8303AIC
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SY8303AIC connects to, and the resistors, capacitors and other passives placed on it.
- The FB pin has a resistor to GND on 7 of 7 designs, most often 5.1 kΩ (then 15 kΩ).
- The LX pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 10 nF).
- The LX pin has a inductor on 7 of 7 designs, most often 3.3 µH (then 47 µH).
- The BS pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| FBpin 1 | Connected to: Signal 100% |
|
| FSpin 2 | Connected to: Signal 100% |
|
| GND_3pin 3 | Connected to: GND 100% | — |
| GND_4pin 4 | Connected to: GND 100% | — |
| INpin 5 | Connected to: VBUS 100% | — |
| LXpin 6 | Connected to: Signal 100% |
|
| BSpin 7 | Connected to: Signal 100% |
|
| ENpin 8 | Connected to: Signal 71% · VBUS 29% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zero star by Auodit, Pd buck converter by bernardopezzo, Usb pd buck converter by bernardopezzo and USB-C-PD-Trigger by coolachlanke.
The SY8303AIC in open source designs
The gallery holds 8 open source boards using the SY8303AIC from 7 GitHub repositories; a typical one measures about 89 × 38 mm and carries around 115 components.
75% use four copper layers or more, and 63% carry an open source license.
The most starred is Core by Hive-RSI-Lab.
Parts used alongside the SY8303AIC
Microcontrollers on boards using the SY8303AIC
What boards using the SY8303AIC are built for
SY8303AIC: common questions
Where can I find a SY8303AIC reference design?
Each of the 8 boards on this page is a real design using the SY8303AIC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SY8303AIC FB pin?
The FB pin has a resistor to GND on 7 of 7 designs, most often 5.1 kΩ (then 15 kΩ). Counted from the KiCad layouts of 7 open source designs using the SY8303AIC.
How is the SY8303AIC LX pin connected?
The LX pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the SY8303AIC.
How is the SY8303AIC BS pin connected?
The BS pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the SY8303AIC.
Which microcontrollers do boards using the SY8303AIC use?
Most are built on STM32 (4), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the SY8303AIC?
The median is 89 × 38 mm, and 25% are two-layer designs.
What is the most popular open source board using the SY8303AIC?
By GitHub stars, Core by Hive-RSI-Lab, with 0 stars.
Can I simulate one of these boards using the SY8303AIC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.