Retro handheld

CopperPilot·retro-handheld·hardware/pocket-retro-handheld.kicad_pcb

Retro handheld PCB layout, top view — open source STM32 board by CopperPilot

About the Retro handheld PCB

Retro handheld is an open source STM32 PCB design by CopperPilot, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 58 × 76 mm, with 136 components from 31 distinct parts.

Its main chip is the STM32F412RET6, from the STM32 family. Other key parts include the TP4056, RT6150AGQW and USBLC6-2SC6. By type, the board carries 53 resistors, 23 capacitors, 16 switches, 14 transistors, 12 diodes and 6 test points.

It belongs with the power & battery, robotics & motion and retro computing designs in this gallery.

From the project

A vertical pocket game console (63 x 81 x 17 mm): STM32F412, 2.4-inch IPS, 1200 mAh LiPo, USB-C charging, CNC metal case. Designed end to end by CopperPilot, open for review.

Generated from rea/spec.yaml and completed with verified JLCPCB/LCSC components (hardware/lcsc.kicadsym, hardware/lcsc.pretty, hardware/lcsc.3dshapes`).

Main components on the Retro handheld

Retro handheld bill of materials (BOM)

136 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F412RET6
U1
1
TP4056
U2
1
RT6150AGQW
U3
1
USBLC6-2SC6
U4
7
AO3401A
Q1, Q3, Q6, Q8, Q10, Q12, Q13
7
AO3400A
Q2, Q4, Q5, Q7, Q9, Q11, Q14
1
TXM12M0004322CBCDO00T
Y1
1
TYPE-C-31-M-12
J1
1
FH12-18S-0.5SH(55)
J2
1
532610271
J3
2
BSMD0805-110-12V
F1, F2
12
B3U-1000P
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +4
4
B3U-3100P
SW11, SW12, SW13, SW14
6
RH-5015
TP1, TP2, TP3, TP4, TP5, TP6
1
B5819W SL
D1
2
BAT54C
D2, D5
1
SD05
D3
8
PESD5V0S2BT
D4, D6, D7, D8, D9, D10, D11, D12
1
SWPA3015S2R2MT
2.2uH
L1
1
BLM18PG121SN1D
L2
Show 11 more
QtyPartRefs
2
0402CG120J500NT
12pF
C1, C2
10
CL05B104KB54PNC
100nF
C3, C8, C9, C11, C12, C13, C14, C18 +2
4
CL10A475KO8NNNC
4.7uF
C4, C6, C10, C16
3
TCC0603X5R106M160CT
10uF
C5, C7, C17
4
CL05A105KO5NNNC
1uF
C15, C19, C22, C23
4
0402WGF5101TCE
5.1k
R1, R2, R4, R23
1
0402WGF3301TCE
3.3k
R3
3
0402WGF5603TCE
560k
R5, R18, R50
9
0402WGF1003TCE
100k
R6, R10, R16, R17, R20, R31, R32, R49 +1
32
0402WGF1002TCE
10k
R7, R8, R11, R12, R13, R14, R15, R19 +24
4
0603WAF1000T5E
100
R9, R46, R47, R48

Retro handheld design files

The KiCad project lives in the CopperPilot/retro-handheld repository on GitHub; these links point at the commit this page was built from.

Retro handheld: common questions

What microcontroller does the Retro handheld use?

The Retro handheld is built around the STM32F412RET6, from the STM32 family.

How big is the Retro handheld PCB?

The Retro handheld measures 58 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Retro handheld?

136 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Retro handheld design files?

From the CopperPilot/retro-handheld repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Retro handheld design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which CopperPilot chose for the repository.

Can I test firmware for the Retro handheld without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards