Stereo amp module
copperWhispers·stereo-amp-module·hardware/STEREO_AMP_MODULE_V1.kicad_pcb
About the Stereo amp module
Stereo amp module is an open source PCB design by copperWhispers, published on GitHub under the Custom license license. It is a 2-layer board measuring 65.2 × 45.2 mm, with 61 components from 14 distinct parts.
Other key parts include the TPA3116D2DADR. By type, the board carries 29 capacitors, 9 resistors, 4 inductors and 1 IC.
It belongs with the audio and test & measurement designs in this gallery.
From the project
Open-source TPA3116D2 class-D stereo amplifier. KiCad source, gerbers, BOM, and the bench measurements.
An open-source stereo class-D amplifier board built around the TI TPA3116D2. Full KiCad source, gerbers, and a BOM. Link to TPA3116D2 Part: https://www.ti.com/lit/ds/symlink/tpa3118d2.pdf?ts=1788008862639&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTPA3118D2 This is an interesting part with many different configurations which can handle 4 ohms and 8 ohms Stereo Speakers at various Power ratings:
Main components on the Stereo amp module
Stereo amp module bill of materials (BOM)
61 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPA3116D2DADR | DAD0032A_L | U1 |
| 18 | ~ | TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | Through_Hole_Pad1, Through_Hole_Pad2, Through_Hole_Pad3, Through_Hole_Pad4, Through_Hole_Pad5, Through_Hole_Pad6, Through_Hole_Pad7, Through_Hole_Pad8 +10 |
| 4 | 11UH 11u | L_Axial_L11.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_MECC | L1, L2, L3, L4 |
| 5 | 10NF 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C36, C37, C38, C43 |
| 2 | 10UF 10u | CP_Axial_L11.0mm_D5.0mm_P18.00mm_Horizontal | C15, C16 |
| 3 | 1UF 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17, C18, C19 |
| 3 | 100NF 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C22, C29 |
| 6 | 1NF 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21, C28, C39, C40, C41, C42 |
| 2 | 220UF 220u | CP_Axial_L11.0mm_D5.0mm_P18.00mm_Horizontal | C23, C30 |
| 4 | 220NF 220n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C25, C26, C27 |
| 4 | 1.5UF 1.4u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32, C33, C34, C35 |
| 1 | 20K 20k | R_0603_1608Metric | R24 |
| 3 | 100K 100k | R_0603_1608Metric | R25, R26, R27 |
| 5 | 3.3R 3.3 | R_0603_1608Metric | R28, R29, R30, R31, R32 |
Stereo amp module design files
The KiCad project lives in the copperWhispers/stereo-amp-module repository on GitHub; these links point at the commit this page was built from.
Stereo amp module: common questions
How big is the Stereo amp module?
The Stereo amp module measures 65.2 × 45.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stereo amp module?
61 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stereo amp module design files?
From the copperWhispers/stereo-amp-module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stereo amp module design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956