CE-PiicoDev-Servo-Driver
CoreElectronics·CE-PiicoDev-Servo-Driver·PCB/CE-PiicoDev-Servo-Driver.kicad_pcb
About the CE-PiicoDev-Servo-Driver PCB
CE-PiicoDev-Servo-Driver is an open source PCB design by CoreElectronics, published on GitHub under the MIT license. It is a 2-layer board measuring 25.4 × 52 mm, with 26 components from 13 distinct parts.
Other key parts include the PCA9685PW. By type, the board carries 11 connectors, 9 resistors, 2 jumpers, 1 IC, 1 switch and 1 diode.
It belongs with the robotics & motion designs in this gallery.
From the project
Hardware repo for the PiicoDev Servo Driver Module
This is the repo for the Core Electronics PiicoDev Servo Driver PCB project.
If you have any technical questions, or concerns about licensing, please contact technical support on the Core Electronics forums.
\"PiicoDev\" and the PiicoDev logo are trademarks of Core Electronics Pty Ltd.
Main components on the CE-PiicoDev-Servo-Driver
CE-PiicoDev-Servo-Driver bill of materials (BOM)
26 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U1 |
| 2 | — | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1, J2 |
| 4 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left | J3, J4, J5, J11 |
| 2 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J6, J7 |
| 2 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12-with-paste | J8, J9 |
| 1 | Breakout Header | PiicoDev_header_4pin | J10 |
| 1 | PWR LED | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | I2C PU | SolderJumper-3_P1.3mm_Closed_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | SW_DIP_x02 | SW_DIP_x02_Slide_CHS-02A1 | SW1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | 10u | C_0603_1608Metric | C2 |
| 5 | 10k | R_0402_1005Metric | R1, R2, R3, R8, R9 |
| 4 | 5.1k | R_0402_1005Metric | R4, R5, R6, R7 |
CE-PiicoDev-Servo-Driver design files
The KiCad project lives in the CoreElectronics/CE-PiicoDev-Servo-Driver repository on GitHub; these links point at the commit this page was built from.
CE-PiicoDev-Servo-Driver: common questions
How big is the CE-PiicoDev-Servo-Driver PCB?
The CE-PiicoDev-Servo-Driver measures 25.4 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CE-PiicoDev-Servo-Driver?
26 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the CE-PiicoDev-Servo-Driver design files?
From the CoreElectronics/CE-PiicoDev-Servo-Driver repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CE-PiicoDev-Servo-Driver design in my own project?
Yes, under the terms of its MIT license, which CoreElectronics chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979