OnStepX-Eq4
Cosmiccirkit01·OnStepX-Eq4·KICAD/Layout/onstep.kicad_pcb
About the OnStepX-Eq4 PCB
OnStepX-Eq4 is an open source PCB design by Cosmiccirkit01, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 90 × 78.5 mm, with 9 components from 6 distinct parts.
Other key parts include the DEVKIT_V1_ESP32-WROOM-32 and MP2307 BUCK. By type, the board carries 2 ICs and 2 connectors.
It belongs with the robotics & motion and iot & wireless designs in this gallery.
From the project
Converting a manual Skywatcher EQ4 equatorial mount into a fully computerized GoTo mount using OnStepX firmware on an ESP32 microcontroller.
Converting a manual Skywatcher EQ4 equatorial mount into a fully computerized GoTo mount using OnStepX firmware on an ESP32 microcontroller.
OnStepX is an open-source, computerized GoTo controller for telescope mounts, built around stepper motors. It supports both Equatorial and Alt/Az mounts and runs on a range of microcontrollers (ESP32, STM32 Blue Pill/Black Pill, Fysetc boards, Teensy, etc.).

Main components on the OnStepX-Eq4
OnStepX-Eq4 bill of materials (BOM)
9 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DEVKIT_V1_ESP32-WROOM-32 | MODULE_DEVKIT_V1_ESP32-WROOM-32 | U1 |
| 1 | MP2307 BUCK | MP2307 Buck Converter | U2 |
| 2 | Screw_Terminal_01x04 | TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal | J1, J2 |
| 2 | EEUFC1H101 | CAPPRD500W60D1000H1250 | 100UF,50V1, 100UF,50V2 |
| 2 | Pololu_Breakout_A4988 | Pololu_Breakout-16_15.2x20.3mm | AXIS1, AXIS2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | INPUT1 |
OnStepX-Eq4 design files
The KiCad project lives in the Cosmiccirkit01/OnStepX-Eq4 repository on GitHub; these links point at the commit this page was built from.
OnStepX-Eq4: common questions
How big is the OnStepX-Eq4 PCB?
The OnStepX-Eq4 measures 90 × 78.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OnStepX-Eq4?
9 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the OnStepX-Eq4 design files?
From the Cosmiccirkit01/OnStepX-Eq4 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the OnStepX-Eq4 design in my own project?
Yes, under the terms of its GPL-3.0 license, which Cosmiccirkit01 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979