15 open source boards using the DEVKIT_V1_ESP32-WROOM-32
Real designs built with the DEVKIT_V1_ESP32-WROOM-32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AstrotrackerH1
jaydenaleung
111.3 × 70.7 mm24 parts2LNo license2AVR/Arduino
Carputer
Carputer-project142.5 × 99.1 mm52 parts2LCERN-OHL-P-2.01AquarWorld - Circuito
IvanBarrientos16
147.7 × 90.8 mm69 parts2LNo license0IoT-Environmental-Monitoring-System
Chethien1912
99.4 × 99.3 mm67 parts2LMIT0AVR/Arduino
Carputer
grtwall
142.5 × 99.1 mm52 parts2LCERN-OHL-P-2.00Open-Nail-Printer
Novitech3D
100 × 100 mm37 parts2LNo license0Control de panel
martincrespo77
150 × 50 mm35 parts2LNo license0ESP32-shield
muhaimin44
82.9 × 92.6 mm29 parts2LNo license0FPV-DRONE
bottlecoder-raj
29.8 × 56.2 mm22 parts2LNo license0ESP32
Ac vent controller
Pierowheelz
89.5 × 49 mm15 parts2LNo license0OnStepX-Eq4
Cosmiccirkit01
90 × 78.5 mm9 parts2LGPL-3.00AirPoint-ESP32-Mouse
sudipbandale2010-pixel
170.3 × 56.4 mm6 parts2LMIT0Neomotion
Nyaigoti
56 × 95 mm5 parts2LNo license0ESP32
TermoInteligente
SamGonzalez1708
70 × 75 mm5 parts2LNo license0- schematic only · 2 parts
DeckStat
emdcomputer-crypto
2 partsNo license0
How designs wire the DEVKIT_V1_ESP32-WROOM-32
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the DEVKIT_V1_ESP32-WROOM-32 connects to, and the resistors, capacitors and other passives placed on it.
- The SD2 pin is left unconnected on 13 of 14 designs.
- The SD3 pin is left unconnected on 13 of 14 designs.
- The IO12 pin is left unconnected on 12 of 14 designs (a signal on 2).
- The CMD pin is left unconnected on 12 of 14 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SENSOR_VPpin 3 | Connected to: Not connected 64% · a signal 36% | — |
| SENSOR_VNpin 4 | Connected to: Not connected 64% · a signal 36% | — |
| IO14pin 12 | Connected to: Not connected 79% · a signal 21% | — |
| IO12pin 13 | Connected to: Not connected 86% | — |
| SD2pin 16 | Connected to: Not connected 93% | — |
| SD3pin 17 | Connected to: Not connected 93% | — |
| CMDpin 18 | Connected to: Not connected 86% | — |
| SD1pin 22 | Connected to: Not connected 69% · a signal 31% | — |
| IO2pin 24 | Connected to: Not connected 71% · a signal 29% | — |
| RXD0pin 34 | Connected to: Not connected 63% · a signal 38% | — |
| TXD0pin 35 | Connected to: Not connected 75% · a signal 25% | — |
| IO23pin 37 | Connected to: Not connected 63% · a signal 38% | — |
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AstrotrackerH1 by jaydenaleung, Carputer pcb by Carputer-project, FPV-DRONE by bottlecoder-raj and IoT-Environmental-Monitoring-System by Chethien1912.
The DEVKIT_V1_ESP32-WROOM-32 in open source designs
The gallery holds 15 open source boards using the DEVKIT_V1_ESP32-WROOM-32 from 15 GitHub repositories; a typical one measures about 99.7 × 84.6 mm and carries around 24 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is AstrotrackerH1 by jaydenaleung.
Parts used alongside the DEVKIT_V1_ESP32-WROOM-32
Microcontrollers on boards using the DEVKIT_V1_ESP32-WROOM-32
What boards using the DEVKIT_V1_ESP32-WROOM-32 are built for
DEVKIT_V1_ESP32-WROOM-32: common questions
Where can I find a DEVKIT_V1_ESP32-WROOM-32 reference design?
Each of the 15 boards on this page is a real design using the DEVKIT_V1_ESP32-WROOM-32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DEVKIT_V1_ESP32-WROOM-32 SD2 pin connected?
The SD2 pin is left unconnected on 13 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the DEVKIT_V1_ESP32-WROOM-32.
How is the DEVKIT_V1_ESP32-WROOM-32 SD3 pin connected?
The SD3 pin is left unconnected on 13 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the DEVKIT_V1_ESP32-WROOM-32.
How is the DEVKIT_V1_ESP32-WROOM-32 IO12 pin connected?
The IO12 pin is left unconnected on 12 of 14 designs (a signal on 2). Counted from the KiCad layouts of 14 open source designs using the DEVKIT_V1_ESP32-WROOM-32.
What parts are used alongside the DEVKIT_V1_ESP32-WROOM-32?
The LM7805_TO220, ATmega328P-PU, OC09600, TMC2209_SILENTSTEPSTICK and ULN2002A appear in the most repositories here.
Which microcontrollers do boards using the DEVKIT_V1_ESP32-WROOM-32 use?
Most are built on AVR/Arduino (2) and ESP32 (2).
How big is a typical board using the DEVKIT_V1_ESP32-WROOM-32?
The median is 99.7 × 84.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the DEVKIT_V1_ESP32-WROOM-32?
By GitHub stars, AstrotrackerH1 by jaydenaleung, with 2 stars.
Can I simulate one of these boards using the DEVKIT_V1_ESP32-WROOM-32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.