DE0 Module for CP 400 Color FPGA
About the DE0 Module for CP 400 Color FPGA
DE0 Module for CP 400 Color FPGA is an open source ESP8266 PCB design by costarc, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 88.1 × 99.1 mm, with 21 components from 17 distinct parts.
Its main chip is the ESP8266-01, from the ESP8266 family. By type, the board carries 9 connectors, 6 resistors, 2 capacitors and 1 diode.
From the project
PCB Kit (modular) to fit the Brazilian CP 400 Color case
https://en.wikipedia.org/wiki/Prol%C3%B3gica_CP-400
DE0 Module for CP 400 Color FPGA bill of materials (BOM)
21 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GPIO1 | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | ear | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | mic | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Joystick 1 | PinHeader_2x05_P2.54mm_Vertical | J4 |
| 1 | Joystick 2 | PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | Audio Out | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | SD_Card | SD_TE_2041021 | J7 |
| 1 | ESP8266-01 | PinHeader_2x04_P2.54mm_Vertical | J8 |
| 1 | GPIO | PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | btn_0 | SW_PUSH_6mm_2Holes | PB0 |
| 1 | COLOR | SW_PUSH_6mm_2Holes | PB1 |
| 1 | RST | SW_PUSH_6mm_2Holes | PB2 |
| 1 | LED | LED_D3.0mm | D1 |
| 2 | 10nF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 2K2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 3 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5 |
| 1 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
DE0 Module for CP 400 Color FPGA design files
The KiCad project lives in the costarc/CP400_COLOR_FPGA repository on GitHub; these links point at the commit this page was built from.
DE0 Module for CP 400 Color FPGA: common questions
What microcontroller does the DE0 Module for CP 400 Color FPGA use?
The DE0 Module for CP 400 Color FPGA is built around the ESP8266-01, from the ESP8266 family.
How big is the DE0 Module for CP 400 Color FPGA?
The DE0 Module for CP 400 Color FPGA measures 88.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DE0 Module for CP 400 Color FPGA?
21 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the DE0 Module for CP 400 Color FPGA design files?
From the costarc/CP400_COLOR_FPGA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DE0 Module for CP 400 Color FPGA design in my own project?
Yes, under the terms of its GPL-3.0 license, which costarc chose for the repository.
Can I test firmware for the DE0 Module for CP 400 Color FPGA without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in CP400_COLOR_FPGA
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398