Teensy board 03 LED
About the Teensy board 03 LED
Teensy board 03 LED is an open source PCB design by Cosys-Lab, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 18.8 × 17 mm, with 14 components from 7 distinct parts.
By type, the board carries 6 resistors, 4 connectors, 2 transistors and 2 diodes.
From the project
Framework for off-road rc-vehicle monitorring
- teensyboard: First version of the electrical schematic where the PCBs are subdivided based on the constrained PCB size I had to make them at home. - teensyboardv2: A V2 schematic which has an optimized schematic. This could be a good starting point to develop a new PCB. - simulationioprotection: Simulation in KiCAD to simulate the IO protection. - simulationcurrentprotection: Simulation in KiCAD to simulate the current protection. - simulationbatterystabilizer: Simulation in KiCAD to simulate the battery stabilization. - simulationadcprotection: Simulation in KiCAD to simulate the ADC…
Teensy board 03 LED bill of materials (BOM)
14 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | AO3400A | SOT-23 | Q2, Q5 |
| 3 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J205, J206, J237 |
| 1 | Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J222 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D3 |
| 2 | 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R29 |
| 2 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R74 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R30 |
Teensy board 03 LED design files
The KiCad project lives in the Cosys-Lab/TruggySense repository on GitHub; these links point at the commit this page was built from.
Teensy board 03 LED: common questions
How big is the Teensy board 03 LED?
The Teensy board 03 LED measures 18.8 × 17 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Teensy board 03 LED?
14 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Teensy board 03 LED design files?
From the Cosys-Lab/TruggySense repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Teensy board 03 LED design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Cosys-Lab chose for the repository.
More boards in TruggySense
NXPTeensy boardV 1
66.5 × 46 mm590 parts2LCC-BY-SA-4.01
Teensy board 07 adc buffer
66.5 × 46 mm126 parts2LCC-BY-SA-4.01
Teensy board 10 prot esd 2
66.5 × 46 mm97 parts2LCC-BY-SA-4.01
Teensy board 01 encoder prot out
66.5 × 46 mm89 parts2LCC-BY-SA-4.01
Teensy board 11 prot esd 3
66.5 × 46 mm74 parts2LCC-BY-SA-4.01
Teensy board 05 level conv
66.5 × 46 mm62 parts2LCC-BY-SA-4.01
NXPTeensy board 06 main board
66.5 × 46 mm56 parts2LCC-BY-SA-4.01
Teensy board 09 prot esd 1
66.5 × 46 mm42 parts2LCC-BY-SA-4.01
Teensy board 02 temperature
9.5 × 13.5 mm30 parts2LCC-BY-SA-4.01
ADC Buffer
21 × 14 mm13 parts2LCC-BY-SA-4.01
Out Protection
17.4 × 13.4 mm8 parts2LCC-BY-SA-4.01