Teensy board 05 level conv
About the Teensy board 05 level conv
Teensy board 05 level conv is an open source PCB design by Cosys-Lab, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 66.5 × 46 mm, with 62 components from 19 distinct parts.
By type, the board carries 24 connectors, 19 resistors, 10 transistors, 8 capacitors and 1 diode.
From the project
Framework for off-road rc-vehicle monitorring
- teensyboard: First version of the electrical schematic where the PCBs are subdivided based on the constrained PCB size I had to make them at home. - teensyboardv2: A V2 schematic which has an optimized schematic. This could be a good starting point to develop a new PCB. - simulationioprotection: Simulation in KiCAD to simulate the IO protection. - simulationcurrentprotection: Simulation in KiCAD to simulate the current protection. - simulationbatterystabilizer: Simulation in KiCAD to simulate the battery stabilization. - simulationadcprotection: Simulation in KiCAD to simulate the ADC…
Teensy board 05 level conv bill of materials (BOM)
62 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | AO3400A | SOT-23 | Q4, Q8, Q9, Q18, Q19, Q20, Q21, Q22 +1 |
| 1 | BC817 | SOT-23 | Q14 |
| 1 | GPS_TX | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | GPS_RX | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | SPI_CS | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SPI_MOSI | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | SPI_MISO | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Temperature_Bus | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | I2C_SCL | PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | I2C_SDA | PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | IBUS | PinHeader_1x03_P2.54mm_Vertical | J24 |
| 1 | SPI_SCK | PinHeader_1x03_P2.54mm_Vertical | J45 |
| 2 | Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J99, J100 |
| 12 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J197, J198, J199, J200, J201, J202, J203, J204 +4 |
| 1 | 1N4001 | D_SMA_Handsoldering | D4 |
| 2 | 10µ | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C56, C58 |
| 2 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C60, C62 |
| 4 | 100µ | CP_Radial_D5.0mm_P2.00mm | C63, C64, C65, C66 |
| 19 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R31, R32, R33, R34, R57, R58, R60 +11 |
Teensy board 05 level conv design files
The KiCad project lives in the Cosys-Lab/TruggySense repository on GitHub; these links point at the commit this page was built from.
Teensy board 05 level conv: common questions
How big is the Teensy board 05 level conv?
The Teensy board 05 level conv measures 66.5 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Teensy board 05 level conv?
62 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Teensy board 05 level conv design files?
From the Cosys-Lab/TruggySense repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Teensy board 05 level conv design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Cosys-Lab chose for the repository.
More boards in TruggySense
NXPTeensy boardV 1
66.5 × 46 mm590 parts2LCC-BY-SA-4.01
Teensy board 07 adc buffer
66.5 × 46 mm126 parts2LCC-BY-SA-4.01
Teensy board 10 prot esd 2
66.5 × 46 mm97 parts2LCC-BY-SA-4.01
Teensy board 01 encoder prot out
66.5 × 46 mm89 parts2LCC-BY-SA-4.01
Teensy board 11 prot esd 3
66.5 × 46 mm74 parts2LCC-BY-SA-4.01
NXPTeensy board 06 main board
66.5 × 46 mm56 parts2LCC-BY-SA-4.01
Teensy board 09 prot esd 1
66.5 × 46 mm42 parts2LCC-BY-SA-4.01
Teensy board 02 temperature
9.5 × 13.5 mm30 parts2LCC-BY-SA-4.01
Teensy board 03 LED
18.8 × 17 mm14 parts2LCC-BY-SA-4.01
ADC Buffer
21 × 14 mm13 parts2LCC-BY-SA-4.01
Out Protection
17.4 × 13.4 mm8 parts2LCC-BY-SA-4.01