Teensy board 06 main board
About the Teensy board 06 main board
Teensy board 06 main board is an open source NXP PCB design by Cosys-Lab, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 66.5 × 46 mm, with 56 components from 8 distinct parts.
Its main chip is the Teensy4.1, from the NXP family. By type, the board carries 46 connectors, 6 capacitors, 3 resistors and 1 IC.
From the project
Framework for off-road rc-vehicle monitorring
- teensyboard: First version of the electrical schematic where the PCBs are subdivided based on the constrained PCB size I had to make them at home. - teensyboardv2: A V2 schematic which has an optimized schematic. This could be a good starting point to develop a new PCB. - simulationioprotection: Simulation in KiCAD to simulate the IO protection. - simulationcurrentprotection: Simulation in KiCAD to simulate the current protection. - simulationbatterystabilizer: Simulation in KiCAD to simulate the battery stabilization. - simulationadcprotection: Simulation in KiCAD to simulate the ADC…
Main components on the Teensy board 06 main board
Teensy board 06 main board bill of materials (BOM)
56 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy4.1 | Teensy41 | U1 |
| 3 | Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J3, J14, J15 |
| 43 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J41, J47, J49, J60, J61, J62, J63, J64 +35 |
| 2 | 10µ | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5 |
| 2 | 100µ | CP_Radial_D5.0mm_P2.00mm | C3, C22 |
| 2 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 2k2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
Teensy board 06 main board design files
The KiCad project lives in the Cosys-Lab/TruggySense repository on GitHub; these links point at the commit this page was built from.
Teensy board 06 main board: common questions
What microcontroller does the Teensy board 06 main board use?
The Teensy board 06 main board is built around the Teensy4.1, from the NXP family.
How big is the Teensy board 06 main board?
The Teensy board 06 main board measures 66.5 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Teensy board 06 main board?
56 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Teensy board 06 main board design files?
From the Cosys-Lab/TruggySense repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Teensy board 06 main board design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Cosys-Lab chose for the repository.
Can I test firmware for the Teensy board 06 main board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in TruggySense
NXPTeensy boardV 1
66.5 × 46 mm590 parts2LCC-BY-SA-4.01
Teensy board 07 adc buffer
66.5 × 46 mm126 parts2LCC-BY-SA-4.01
Teensy board 10 prot esd 2
66.5 × 46 mm97 parts2LCC-BY-SA-4.01
Teensy board 01 encoder prot out
66.5 × 46 mm89 parts2LCC-BY-SA-4.01
Teensy board 11 prot esd 3
66.5 × 46 mm74 parts2LCC-BY-SA-4.01
Teensy board 05 level conv
66.5 × 46 mm62 parts2LCC-BY-SA-4.01
Teensy board 09 prot esd 1
66.5 × 46 mm42 parts2LCC-BY-SA-4.01
Teensy board 02 temperature
9.5 × 13.5 mm30 parts2LCC-BY-SA-4.01
Teensy board 03 LED
18.8 × 17 mm14 parts2LCC-BY-SA-4.01
ADC Buffer
21 × 14 mm13 parts2LCC-BY-SA-4.01
Out Protection
17.4 × 13.4 mm8 parts2LCC-BY-SA-4.01
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532