BMP BasicClone
About the BMP BasicClone PCB
BMP BasicClone is an open source PCB design by cracked-machine, published on GitHub. It is a 2-layer board measuring 41.9 × 92 mm, with 57 components from 25 distinct parts.
By type, the board carries 23 resistors, 13 capacitors, 6 diodes, 4 transistors and 1 connector.
It belongs with the audio designs in this gallery.
From the project
Series of BigMuff Clones
BMP BasicClone bill of materials (BOM)
57 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MMBT3904 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | BARREL_JACK | BARREL_JACK | J1 |
| 4 | CONN_01X06 | Pin_Header_Straight_1x06_Pitch2.54mm | J_AUX2MAIN_1, J_AUX2MAIN_2, J_MAIN2AUX_1, J_MAIN2AUX_2 |
| 2 | JACK__MONO_2P_NC | JackSocket_Mono_PCB | J_IN1, J_OUT1 |
| 3 | 100K | Potentiometer_Bourns_PTV09A-1_Horizontal | SUSTAIN1, TONE1, VOLUME1 |
| 1 | SW_3PDT_on_on | SW_3PDT_W18MM_L17.3MM_P5.3MM_D2MM_SolderLugs | SW_EN1 |
| 1 | D_Schottky | D_SOD-323 | D1 |
| 4 | 1N914 | D_SOD-323 | D2, D3, D4, D5 |
| 1 | LED | LED_D5.0mm | D6 |
| 4 | 100nF | C_0805_HandSoldering | C1, C4, C7, C12 |
| 3 | 560pF | C_0805_HandSoldering | C2, C6, C9 |
| 4 | 1uF | C_0805_HandSoldering | C3, C5, C8, C13 |
| 1 | 4.7nF | C_0805_HandSoldering | C10 |
| 1 | 10nF | C_0805_HandSoldering | C11 |
| 2 | 39K | R_0805_HandSoldering | R1, R17 |
| 4 | 100K | R_0805_HandSoldering | R2, R8, R13, R20 |
| 3 | 470K | R_0805_HandSoldering | R3, R9, R14 |
| 4 | 10K | R_0805_HandSoldering | R4, R7, R10, R12 |
| 1 | 120R | R_0805_HandSoldering | R5 |
| 2 | 1K | R_0805_HandSoldering | R6, R23 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 150R | R_0805_HandSoldering | R11, R16 |
| 2 | 15K | R_0805_HandSoldering | R15, R21 |
| 1 | 22K | R_0805_HandSoldering | R18 |
| 1 | 430K | R_0805_HandSoldering | R19 |
| 1 | 3K3 | R_0805_HandSoldering | R22 |
BMP BasicClone design files
The KiCad project lives in the cracked-machine/BigMuffs repository on GitHub; these links point at the commit this page was built from.
BMP BasicClone: common questions
How big is the BMP BasicClone PCB?
The BMP BasicClone measures 41.9 × 92 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BMP BasicClone?
57 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the BMP BasicClone design files?
From the cracked-machine/BigMuffs repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the BMP BasicClone design in my own project?
The repository has no license, so all rights stay with cracked-machine. Use it as a reference, and ask the author before reusing the design.
More boards in BigMuffs
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687