CR-160-R7
CrematInc·CR-160-R7
About the CR-160-R7 PCB
CR-160-R7 is an open source PCB design by CrematInc, published on GitHub. It is a 2-layer board measuring 58.4 × 94 mm, with 63 components from 30 distinct parts.
Other key parts include the EL5163, CR-200, CR-210, HA9P5002 and MAX4649. By type, the board carries 25 resistors, 16 capacitors, 7 ICs, 5 connectors, 2 transistors and 2 diodes.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
evaluation board for Cremat's shaping amplifier modules CR-200-X and CR-210
The CR-160-R7 board is an evaluation board for Cremat Inc's shaping amplifier modules (CR-200-X) and baseline restorer module (CR-210).
Included is a bill of materials (BOM) with supplier information. The CAD files are included and were created by KiCad. Gerber files and drill file are also included This is offered as open source hardware under the MIT license.
Main components on the CR-160-R7
CR-160-R7 bill of materials (BOM)
63 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | EL5163 | SC-70-5 | U1, U2, U3 |
| 1 | CR-200 | 8pinSIP | U4 |
| 1 | CR-210 | 8pinSIP | U5 |
| 1 | HA9P5002 | SO8 | U6 |
| 1 | MAX4649 | SOT-23-8 | U7 |
| 1 | MMBT3904 | SOT23-3 | Q1 |
| 1 | MMBT3906 | SOT23-3 | Q2 |
| 1 | input | BNC | J1 |
| 1 | output | BNC | J2 |
| 1 | +12V | banana | J3 |
| 1 | GND | banana | J4 |
| 1 | -12V | banana | J5 |
| 1 | Jump | 320 | JU1 |
| 1 | gain/polarity | 3Dip | SW1 |
| 2 | NTPA7220 | 200mil | TH1, TH2 |
| 2 | 5.6V | SOD-323 | D1, D2 |
| 2 | 10uH | 0805 | L1, L2 |
| 11 | 10uF | 1206 | C1, C2, C3, C4, C5, C7, C8, C9 +3 |
| 1 | 1uF | 1206 | C6 |
| 2 | 0.1uF | 0805 | C11, C12 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1000uF | electrolytic_1000uF_16V | C15, C16 |
| 5 | 1.0k | 0805 | R1, R2, R20, R23, R24 |
| 4 | 390 | 0805 | R3, R5, R14, R17 |
| 2 | 43 | 1206 | R4, R6 |
| 1 | 200k | Trimpot_SMD | R7 |
| 1 | 1k | trimpot_Vishay_T93XB | R8 |
| 1 | 100k | 0805 | R9 |
| 8 | 4.7 | 1206 | R10, R11, R12, R13, R15, R16, R21, R22 |
| 2 | 47 | 1206 | R18, R19 |
| 1 | 100k | trimpot | R25 |
CR-160-R7 design files
The KiCad project lives in the CrematInc/CR-160-R7 repository on GitHub; these links point at the commit this page was built from.
- LayoutCR-160-R7.kicad_pcb
- BOMCR-160-R7 BOM.xls
CR-160-R7: common questions
How big is the CR-160-R7 PCB?
The CR-160-R7 measures 58.4 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CR-160-R7?
63 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CR-160-R7 design files?
From the CrematInc/CR-160-R7 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the CR-160-R7 design in my own project?
The repository has no license, so all rights stay with CrematInc. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k