VAF-clock

Croionxx·VAF-clock

VAF-clock

About the VAF-clock PCB

VAF-clock is an open source PCB design by Croionxx, published on GitHub under the MIT license. It is a board, with 25 components from 6 distinct parts.

Other key parts include the D168K and 74LS145. By type, the board carries 10 ICs, 8 resistors, 4 diodes, 2 capacitors and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

A reverse engineered VAF meter clock. The 3x3 matrix 7 segment display was reverse engineered and a esp32 and RTC was used to convert it into a clock. It shows the time, date and also has a timer. It automatically gets the correct time and date form the internet.

This project was born from curiosity. Starting with a standard VAF meter, I used a multimeter to reverse-engineer the PCB traces and understand the display driver logic. The original mainboard was replaced (or bypassed) with a custom solution powered by an ESP32.

The result is a retro-industrial style clock that retains the rugged look of the original panel meter while running modern firmware.

Main components on the VAF-clock

VAF-clock bill of materials (BOM)

25 components, 6 distinct parts.

QtyPartRefs
9
D168K
U1, U2, U3, U4, U5, U6, U7, U8 +1
1
74LS145
U10
1
Conn_02x10_Top_Bottom
J1
4
LED
D1, D2, D3, D4
2
C
C1, C2
8
R
R1, R2, R3, R4, R5, R6, R7, R8

VAF-clock design files

The KiCad project lives in the Croionxx/VAF-clock repository on GitHub; these links point at the commit this page was built from.

VAF-clock: common questions

How many components are on the VAF-clock?

25 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the VAF-clock design files?

From the Croionxx/VAF-clock repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the VAF-clock design in my own project?

Yes, under the terms of its MIT license, which Croionxx chose for the repository.

Similar boards