18 open source boards using the D168K
Real designs built with the D168K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
MVCU F407
Vaaarad07
132.9 × 108.4 mm100 parts4LMIT10Preperf 10x10 V1
ApophisXIV
100 × 100 mm1359 parts8LNo license2PIC
EduBoard PIC16
hassan-ibn-mustafa
193.5 × 141 mm72 parts2LNo license1OldStyleDigitalClock
decadenza
155 × 85 mm85 parts2LCC-BY-SA-4.00Https github.com bejaouihamza-IR-Interruption-Detector
bejaouihamza
106.1 × 110.1 mm71 parts2LNo license0ESP32
TrainTracker
wcbq
84.8 × 64.3 mm64 parts2LNo license0Isa post card
ifilot
87.5 × 86.4 mm37 parts2LNo license0AVR/Arduino
LatheDisplay
eshazen
85.7 × 63.5 mm36 parts2LNo license0Dual7Seg
Deefoozy
53.3 × 61 mm21 parts2LNo license0AVR/Arduino
14segment score counter
RaZerTeC
80 × 70 mm10 parts2LGPL-3.00- schematic only · 57 partsRP2040/RP2350
Archive fuzz
ravinder-Olivier
57 partsNo license0 - schematic only · 25 parts
VAF-clock
Croionxx
25 partsMIT0 ESP32
020 NiMH Battery Charger
akbar-q
100 × 72.8 mm82 parts2LNo license0AVR/Arduino
Matrix-7seg8-x02-x06
McbeEringi
95 × 100 mm51 parts2LMIT2Practise PCB For Clock/Counter
akbar-q
97 × 91 mm67 parts2LNo license0AVR/Arduino
Serial usbc dip-7seg clk
McbeEringi
100 × 100 mm42 parts2LMIT2Output register
ifilot
101.6 × 55.9 mm30 parts2LCERN-OHL-S-2.02C3-wroom ext clk set
McbeEringi
94 × 95.2 mm27 parts2LMIT2
How designs wire the D168K
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the D168K connects to, and the resistors, capacitors and other passives placed on it.
- The E pin has a series resistor on 10 of 13 designs, most often 1 kΩ (then 220 Ω).
- The D pin has a series resistor on 10 of 13 designs, most often 1 kΩ (then 220 Ω).
- The C pin has a series resistor on 10 of 13 designs, most often 1 kΩ (then 220 Ω).
- The B pin has a series resistor on 10 of 13 designs, most often 1 kΩ (then 220 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Epin 1 | Connected to: D168K 31% |
|
| Dpin 2 | Connected to: D168K 31% |
|
| CCpin 3, 8 | Connected to: GND 62% · a signal 27% | — |
| Cpin 4 | Connected to: D168K 31% |
|
| DPpin 5 | Connected to: D168K 23% · not connected 46% |
|
| Bpin 6 | Connected to: D168K 31% |
|
| Apin 7 | Connected to: D168K 31% |
|
| Fpin 9 | Connected to: D168K 31% |
|
| Gpin 10 | Connected to: D168K 31% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MVCU F407 by Vaaarad07, Preperf 10x10 V1 by ApophisXIV, Output register by ifilot and C3-wroom ext clk set by McbeEringi.
The D168K in open source designs
The gallery holds 18 open source boards using the D168K from 15 GitHub repositories; a typical one measures about 98.5 × 88.7 mm and carries around 54 components.
88% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is MVCU F407 by Vaaarad07.
Parts used alongside the D168K
Microcontrollers on boards using the D168K
What boards using the D168K are built for
D168K: common questions
Where can I find a D168K reference design?
Each of the 18 boards on this page is a real design using the D168K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the D168K E pin?
The E pin has a series resistor on 10 of 13 designs, most often 1 kΩ (then 220 Ω). Counted from the KiCad layouts of 13 open source designs using the D168K.
What resistor goes on the D168K D pin?
The D pin has a series resistor on 10 of 13 designs, most often 1 kΩ (then 220 Ω). Counted from the KiCad layouts of 13 open source designs using the D168K.
What resistor goes on the D168K C pin?
The C pin has a series resistor on 10 of 13 designs, most often 1 kΩ (then 220 Ω). Counted from the KiCad layouts of 13 open source designs using the D168K.
What parts are used alongside the D168K?
The LM7805_TO220, 74HC595, 74HC00, AMS1117-3.3 and NE555D appear in the most repositories here.
Which microcontrollers do boards using the D168K use?
Most are built on AVR/Arduino (4), ESP32 (2), PIC (1) and RP2040/RP2350 (1).
How big is a typical board using the D168K?
The median is 98.5 × 88.7 mm, and 88% are two-layer designs.
What is the most popular open source board using the D168K?
By GitHub stars, MVCU F407 by Vaaarad07, with 10 stars.
Can I simulate one of these boards using the D168K before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.