19 open source boards using the 74LS145
Real designs built with the 74LS145, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 84 parts
Nanocomp6809
breadboardinglabs
84 partsApache-2.024 RP2040/RP2350
Econopet
DLehenbauer
262.5 × 108 mm284 parts2LCC0-1.018RP2040/RP2350
Commodore pet clone
DLehenbauer
262.5 × 108 mm258 parts2LCC0-1.013AVR/Arduino
Cbm keyboard
fachat
386.1 × 102 mm208 parts2LNo license7Lynx-Keyboard
Board-Folk
307 × 108 mm67 parts2LNo license4JC2 v4.1
Emile666
233.7 × 160 mm120 parts2LNo license3Sonic rec9388-keyboard
atsidaev
367 × 134.6 mm114 parts2LCC-BY-SA-4.03KIM-1 RAMpager
hkzlab
123.4 × 134.6 mm65 parts2LCC-BY-NC-4.01Esselte100Keyboard
linuxforum5
364.7 × 125.2 mm78 parts2LNo license0- schematic only · 25 parts
VAF-clock
Croionxx
25 partsMIT0 Omega-Keyboard
skiselev
333.4 × 124.5 mm96 parts2LGPL-3.0456MSX-ONE Keyboard
jdgabbard
200.3 × 95.6 mm87 parts2LGPL-3.028Omega-Keyboard
msx-solis
333.4 × 124.5 mm96 parts2LGPL-3.07CPCSound
Bread80
99.1 × 71.1 mm57 parts2LCERN-OHL-P-2.05AVR/Arduino
Lynx-PS2
Board-Folk
75.9 × 76.5 mm23 parts2LNo license4- schematic only · 99 parts
TRS80 M2 CPU
trs80-net
99 parts2LNo license0 ServicetastaturWeissFake
stonedDiscord
153.7 × 67.3 mm43 parts2LBSD-2-Clause5CPCIOSound
Bread80
99.1 × 52.9 mm38 parts2LCERN-OHL-P-2.05CPCSound - Copy
Bread80
99.1 × 52.9 mm26 parts2LCERN-OHL-P-2.05
How designs wire the 74LS145
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the 74LS145 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF (then 100 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Q6pin 7 | Connected to: A connector 38%, 74LS07 23% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Keyboard by skiselev, MSX-ONE Keyboard by jdgabbard, Econopet by DLehenbauer and Commodore pet clone by DLehenbauer.
The 74LS145 in open source designs
The gallery holds 19 open source boards using the 74LS145 from 16 GitHub repositories; a typical one measures about 248.1 × 107.9 mm and carries around 84 components.
100% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Omega-Keyboard by skiselev.
Parts used alongside the 74LS145
Microcontrollers on boards using the 74LS145
What boards using the 74LS145 are built for
74LS145: common questions
Where can I find a 74LS145 reference design?
Each of the 19 boards on this page is a real design using the 74LS145. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS145 VCC pin?
The VCC pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 13 open source designs using the 74LS145.
What parts are used alongside the 74LS145?
The 74LS07, 74LS245, AS6C1008, 74LS08 and 74LS32 appear in the most repositories here.
Which microcontrollers do boards using the 74LS145 use?
Most are built on AVR/Arduino (2) and RP2040/RP2350 (2).
How big is a typical board using the 74LS145?
The median is 248.1 × 107.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74LS145?
By GitHub stars, Omega-Keyboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74LS145 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.