BatteryPod
cryptoAlgorithm·BatteryPod
About the BatteryPod PCB
BatteryPod is an open source PCB design by cryptoAlgorithm, published on GitHub. It is a 2-layer board measuring 71.5 × 86.3 mm, with 31 components from 18 distinct parts.
Other key parts include the C3188436, C2868209 and C79987. By type, the board carries 16 capacitors, 8 resistors, 3 ICs, 2 diodes, 1 connector and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Battery-powered HomePod power supply replacement aka NotHomePod
Main components on the BatteryPod
BatteryPod bill of materials (BOM)
31 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C3188436 LM5157RTER | QFN_57RTER_TEX | U1 |
| 1 | C2868209 TPS25750DRJKR | IC_TPS25750DRJKR | U2 |
| 1 | C79987 CAT24C256 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | C2843968 USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J2 |
| 2 | C134447 B3100-13-F | D_SMC | D1, D2 |
| 1 | C171581 CDEP15D90T150NP-220MC | CDEP15D90T150NP-220MC | L1 |
| 2 | C342280 10uF | C_2220_5750Metric | C1, C2 |
| 1 | C342988 1uF | C_0603_1608Metric | C3 |
| 3 | C597287 0.1uF | C_0603_1608Metric | C4, C9, C10 |
| 3 | C159791 300pF | C_0603_1608Metric | C5, C14, C15 |
| 1 | C107086 27nF | C_0603_1608Metric | C6 |
| 1 | C307347 10nF | C_0603_1608Metric | C7 |
| 1 | C487156 100uF | CP_Elec_10x10 | C8 |
| 4 | C2992625 10uF | C_0402_1005Metric | C11, C12, C13, C16 |
| 1 | C234251 118K | R_0603_1608Metric | R1 |
| 5 | C491121 2.49K | R_0603_1608Metric | R2, R5, R6, R7, R8 |
| 1 | C218107 63.4K | R_0603_1608Metric | R3 |
| 1 | C705737 1.21K | R_0603_1608Metric | R4 |
BatteryPod design files
The KiCad project lives in the cryptoAlgorithm/BatteryPod repository on GitHub; these links point at the commit this page was built from.
- LayoutBatteryPod.kicad_pcb
- SchematicBatteryPod.kicad_sch
- BOMFab/v0.5/BatteryPod_Bom.csv
BatteryPod: common questions
How big is the BatteryPod PCB?
The BatteryPod measures 71.5 × 86.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BatteryPod?
31 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BatteryPod design files?
From the cryptoAlgorithm/BatteryPod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BatteryPod design in my own project?
The repository has no license, so all rights stay with cryptoAlgorithm. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k