Serene Mini
cshariq·Serene·Serene Mini Hardware(PCB + Schematic)/Serene Mini.kicad_pcb
About the Serene Mini PCB
Serene Mini is an open source STM32 PCB design by cshariq, published on GitHub. It is a 6-layer board measuring 25 × 42.5 mm, with 77 components from 36 distinct parts.
Its main chip is the STM32H743ZIT6, from the STM32 family. Other key parts include the SOT-223-3_TABPIN2, SOT-23-5, ADXL382_ULTRALIB, ADAU1787_ULTRALIB and WQFN-HR18__RYK_TEX. By type, the board carries 39 capacitors, 12 resistors, 9 ICs, 5 connectors, 4 inductors and 3 test points.
It belongs with the audio designs in this gallery.
From the project
Can't hear your friend talking on the highway? Do you need to blast your music just to hear it well? Well, you're in luck, because Serene is a portable noise-cancelling device that can remove all of that noise!
Can't hear your friend talking on the highway? Do you need to blast your music just to hear it well? Well, you're in luck, because Serene is a portable noise-cancelling device that can remove all of that noise!
Just stick it to the roof of your car, and Serene will capture the road noise and output sounds waves that cancel them out, so that you can enjoy a peaceful car ride.
Main components on the Serene Mini
Serene Mini bill of materials (BOM)
77 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SOT-223-3_TABPIN2 AP7361C-33E | SOT-223-3_TabPin2 | U1 |
| 1 | SOT-23-5 AP2112K-1.8 | SOT-23-5 | U2 |
| 1 | STM32H743ZIT6 STM32H753ZITx | LQFP-144_20x20mm_P0.5mm | U3 |
| 1 | ADXL382_ULTRALIB ADXL382-1BCCZ-RL | ADXL382_Ultralib | U4 |
| 1 | ADAU1787_ULTRALIB ADAU1787BCBZRL | ADAU1787_Ultralib | U5 |
| 1 | WQFN-HR18__RYK_TEX BQ25620RYKR | WQFN-HR18__RYK_TEX | U6 |
| 1 | BGM220S_SIL BGM220SC12WGA2R | BGM220S_SIL | U7 |
| 1 | SOT-23-6 USBLC6-2SC6 | SOT-23-6 | U8 |
| 1 | SPARK_SR1120_QFN32 SR1120 | Spark_SR1120_QFN32 | U9 |
| 1 | CRYSTAL_SMD_3225-4PIN_3.2X2.5MM Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CRYSTAL_SMD_3225-4PIN_3.2X2.5MM 32.768 kHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 2 | CONN_X.FL-R-SMT-180_HIR Conn_Coaxial | CONN_X.FL-R-SMT-180_HIR | J1, J6 |
| 1 | CONN_503480-0540_MOL Conn_01x06_Socket | CONN_503480-0540_MOL | J2 |
| 1 | JACK_3.5MM_CUI_SJ2-3593D-SMT_HORIZONTAL AudioJack3_Switch | Jack_3.5mm_CUI_SJ2-3593D-SMT_Horizontal | J4 |
| 1 | USB_C_RECEPTACLE_GCT_USB4085 USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4085 | J5 |
| 2 | INFINEON_PG-LLGA-5-2 IM73A135V01 | Infineon_PG-LLGA-5-2 | MK1, MK2 |
| 1 | BALUN_JOHANSON_1.6X0.8MM Transformer_1P_1S | Balun_Johanson_1.6x0.8mm | T1 |
| 1 | BATT+ | SolderWirePad_1x01_SMD_1x2mm | TP5 |
| 1 | BATT- | SolderWirePad_1x01_SMD_1x2mm | TP6 |
| 1 | BATT_TS | SolderWirePad_1x01_SMD_1x2mm | TP7 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L_0603_1608METRIC 180nH | L_0603_1608Metric | L1 |
| 1 | L_0603_1608METRIC 1.5uH | L_0603_1608Metric | L2 |
| 2 | 600Ω | L_0402_1005Metric | L3, L4 |
| 7 | C_0402_1005METRIC 10uF | C_0402_1005Metric | C1, C2, C7, C36, C38, C39, C40 |
| 6 | C_0402_1005METRIC 10pF | C_0402_1005Metric | C3, C6, C24, C25, C33, C34 |
| 16 | C_0402_1005METRIC 0.1uF | C_0402_1005Metric | C4, C8, C9, C10, C11, C12, C13, C14 +8 |
| 2 | C_0402_1005METRIC 4.7µF | C_0402_1005Metric | C17, C35 |
| 2 | C_0402_1005METRIC 2.2uF | C_0402_1005Metric | C21, C22 |
| 5 | C_0402_1005METRIC 1uF | C_0402_1005Metric | C23, C26, C29, C30, C32 |
| 1 | C_0402_1005METRIC 47nF | C_0402_1005Metric | C37 |
| 2 | R_0402_1005METRIC 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | R_0402_1005METRIC 10k | R_0402_1005Metric | R3 |
| 2 | R_0402_1005METRIC 2.2kΩ | R_0402_1005Metric | R4, R5 |
| 1 | R_0402_1005METRIC 170Ω | R_0402_1005Metric | R6 |
| 3 | R_0402_1005METRIC 10kΩ | R_0402_1005Metric | R7, R11, R15 |
| 3 | R_0402_1005METRIC 100kΩ | R_0402_1005Metric | R9, R10, R16 |
Serene Mini design files
The KiCad project lives in the cshariq/Serene repository on GitHub; these links point at the commit this page was built from.
Serene Mini: common questions
What microcontroller does the Serene Mini use?
The Serene Mini is built around the STM32H743ZIT6, from the STM32 family.
How big is the Serene Mini PCB?
The Serene Mini measures 25 × 42.5 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Serene Mini?
77 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Serene Mini design files?
From the cshariq/Serene repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Serene Mini design in my own project?
The repository has no license, so all rights stay with cshariq. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Serene Mini without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Serene
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k