10 open source boards using the SOT-23-6

Real designs built with the SOT-23-6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the SOT-23-6

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SOT-23-6 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 2Connected to: GND 71% · a signal 29%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ai hardware engineering team by ktanino10, Testgen by AquaBeacon, Sample circuit 01 by chinesejacklee and Serene Mini by cshariq.

The SOT-23-6 in open source designs

The gallery holds 10 open source boards using the SOT-23-6 from 8 GitHub repositories; a typical one measures about 57.5 × 46.2 mm and carries around 27 components.

50% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Ai hardware engineering team by ktanino10.

Parts used alongside the SOT-23-6

Microcontrollers on boards using the SOT-23-6

SOT-23-6: common questions

Where can I find a SOT-23-6 reference design?

Each of the 10 boards on this page is a real design using the SOT-23-6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SOT-23-6 use?

Most are built on Nordic nRF (1) and STM32 (1).

How big is a typical board using the SOT-23-6?

The median is 57.5 × 46.2 mm, and 50% are two-layer designs.

What is the most popular open source board using the SOT-23-6?

By GitHub stars, Ai hardware engineering team by ktanino10, with 1 stars.

Can I simulate one of these boards using the SOT-23-6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part