T12 SolderingStation
About the T12 SolderingStation PCB
T12 SolderingStation is an open source AVR/Arduino PCB design by Cube-Line, published on GitHub. It is a 2-layer board measuring 80 × 23 mm, with 52 components from 35 distinct parts.
Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the MP1584EN, CH224D and OPA2333xxD. By type, the board carries 19 resistors, 14 capacitors, 5 diodes, 4 ICs, 4 connectors and 2 jumpers.
From the project
T12_SolderingStation base on ATMEL328P
Main components on the T12 SolderingStation
T12 SolderingStation bill of materials (BOM)
52 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP1584EN | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U1 |
| 1 | CH224D | QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias | U2 |
| 1 | ATmega328P-A | TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | OPA2333xxD | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 16mHz | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | Conn_01x05_Female | PhoenixContact_MC_1,5_5-G-3.5_1x05_P3.50mm_Horizontal | J4 |
| 2 | Conn_01x06_Female | PinHeader_1x06_P2.54mm_Vertical | J5, J6 |
| 2 | JUMP | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | SW_DPST_Temperature | SW_SPST_Omron_B3FS-100xP | SW1 |
| 1 | RotaryEncoder_2 | EC10E | SW2 |
| 1 | SS54 | D_SMA | D1 |
| 1 | GREEN | LED_0402_1005Metric | D2 |
| 1 | BZV55B5V1 | D_MiniMELF | D3 |
| 1 | 1N4148W | D_SOD-123 | D4 |
| 1 | SDT10A45P5 | PowerDI5 | D5 |
| 1 | L | L_7.3x7.3_H4.5 | L1 |
| 2 | 50V/100nF | C_0603_1608Metric | C1, C3 |
| 1 | 10V/22uF | CP_EIA-3528-21_Kemet-B | C2 |
| 1 | 50V/10uF | CP_EIA-6032-28_Kemet-C | C4 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 50V/100nF | C_0402_1005Metric | C5 |
| 1 | 50V/220pF | C_0402_1005Metric | C6 |
| 1 | NC | C_0402_1005Metric | C7 |
| 1 | 10uF | C_0805_2012Metric | C8 |
| 2 | 1uF | C_0603_1608Metric | C9, C14 |
| 3 | 100nF | C_0603_1608Metric | C10, C11, C13 |
| 1 | 2.2nF | C_0603_1608Metric | C15 |
| 1 | 6.8K | R_0402_1005Metric | R1 |
| 1 | NC | R_0402_1005Metric | R2 |
| 2 | 100K | R_0402_1005Metric | R3, R12 |
| 3 | 20K | R_0402_1005Metric | R4, R6, R13 |
| 6 | 10K | R_0402_1005Metric | R5, R11, R14, R15, R16, R17 |
| 3 | 200K | R_0402_1005Metric | R7, R18, R19 |
| 1 | 68.1K | R_0402_1005Metric | R8 |
| 2 | 5.1K | R_0402_1005Metric | R9, R10 |
T12 SolderingStation design files
The KiCad project lives in the Cube-Line/T12_SolderingStation repository on GitHub; these links point at the commit this page was built from.
T12 SolderingStation: common questions
What microcontroller does the T12 SolderingStation use?
The T12 SolderingStation is built around the ATmega328P-A, from the AVR/Arduino family.
How big is the T12 SolderingStation PCB?
The T12 SolderingStation measures 80 × 23 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the T12 SolderingStation?
52 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the T12 SolderingStation design files?
From the Cube-Line/T12_SolderingStation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the T12 SolderingStation design in my own project?
The repository has no license, so all rights stay with Cube-Line. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the T12 SolderingStation without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in T12_SolderingStation
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746