25 open source boards using the MP1584EN
Real designs built with the MP1584EN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Open mabel
robotmabel
95.5 × 83 mm73 parts2LApache-2.041AVR/Arduino
Pi super ups
mairas
65 × 56 mm86 parts2LBSD-3-Clause2ESP32
PCB V2
BhoumikAcharya
94.5 × 75.6 mm161 parts2LNo license1ESP32
Dongle eaLIVE
joaogabrielsantosD
45 × 55 mm69 parts2LNo license1AVR/Arduino
T12 SolderingStation
Cube-Line
80 × 23 mm52 parts2LNo license1ESP32
Pet filter
ZanzyTHEbar
110 × 80 mm52 parts2LNo license1MP1584EN-Kicad-Template-Module
xgiralt64
19.6 × 23.8 mm18 parts2LNo license1STM32
AI Wallet Grade3
Flamecthulhu
59.7 × 97.2 mm10 parts2LNo license1- schematic only · 38 parts
Epicura spec
manasXP
38 partsNo license1 ESP32
Robot Main Controller V3
manhtienvu-vn
130.5 × 91.1 mm123 parts2LNo license0STM32
Falcon
Adnanosman9
46.8 × 44.7 mm75 parts4LMIT0ESP32
ESP32-Flight-Controller v2
shazmeenShz
67.5 × 53.5 mm61 parts4LMIT0Power-Loss-Heat-Creep-Arrester
deogratius2phantom
62 × 41 mm48 parts2LCC0-1.00ESP32
Wattplot
mokahlo
80 × 60 mm42 parts2LMIT0IoT-Enabled-WiFi-Router-UPS
HarshBotre
81.8 × 60.4 mm19 parts4LNo license0ESP8266
Smart-Home-Zisternen-Pegelmessung
Pytonballoon810
70 × 60 mm8 parts2LNo license0- schematic only · 94 partsSTM32
OpenVCU
Rujul-Rumale
94 partsCERN-OHL-S-2.00 - schematic only · 70 partsESP32
Kicad
maximiliano280311
70 partsNo license0 - schematic only · 59 partsSTM32
Delta-Printer
Icyconfusion
59 partsNo license0 - schematic only · 45 partsSTM32
SENTINEL
MartinBugar
45 partsMIT0 AVR/Arduino
Arduino nano with battery integration
Chirag-Vadrali
79.5 × 35.7 mm90 parts4LNo license1STM32
STM32H723 SDC Ver 1
manhtienvu-vn
93.2 × 65 mm57 parts2LNo license0ESP32
CATS
rickwargo
86 × 70 mm27 parts2LNo license0ESP8266-Breakdown Board
Chirag-Vadrali
87.5 × 65 mm60 parts2LNo license1BuckMP1584
BhoumikAcharya
19.6 × 23.8 mm18 parts2LNo license1
How designs wire the MP1584EN
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the MP1584EN connects to, and the resistors, capacitors and other passives placed on it.
- The SW_1 pin has a series capacitor on 11 of 14 designs, most often 100 nF (then 1 µF).
- The SW_1 pin has a inductor on 11 of 14 designs, most often 15 µH (then 4.7 µH).
- The FB_4 pin has a resistor to GND on 11 of 14 designs, most often 40.2 kΩ (then 8.2 kΩ).
- The BST_8 pin has a series capacitor on 11 of 12 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SW_1pin 1 | Connected to: Signal 86% |
|
| EN_2pin 2 | Connected to: Signal 71% |
|
| COMP_3pin 3 | Connected to: Signal 79% |
|
| FB_4pin 4 | Connected to: Signal 79% |
|
| GND_5pin 5 | Connected to: GND 92% | — |
| FREQ_6pin 6 | Connected to: Signal 83% |
|
| VIN_7pin 7 | Connected to: VIN 75% · a signal 17% |
|
| BST_8pin 8 | Connected to: Signal 92% |
|
| GNDpin 9 | Connected to: GND 91% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open mabel by robotmabel, Pi super ups by mairas, BuckMP1584 by BhoumikAcharya and ESP8266-Breakdown Board by Chirag-Vadrali.
The MP1584EN in open source designs
The gallery holds 25 open source boards using the MP1584EN from 22 GitHub repositories; a typical one measures about 79.8 × 60 mm and carries around 57 components.
80% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.
The most starred is Open mabel by robotmabel.
Parts used alongside the MP1584EN
Microcontrollers on boards using the MP1584EN
What boards using the MP1584EN are built for
MP1584EN: common questions
Where can I find a MP1584EN reference design?
Each of the 25 boards on this page is a real design using the MP1584EN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MP1584EN SW_1 pin connected?
The SW_1 pin has a series capacitor on 11 of 14 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the MP1584EN.
What resistor goes on the MP1584EN FB_4 pin?
The FB_4 pin has a resistor to GND on 11 of 14 designs, most often 40.2 kΩ (then 8.2 kΩ). Counted from the KiCad layouts of 14 open source designs using the MP1584EN.
How is the MP1584EN BST_8 pin connected?
The BST_8 pin has a series capacitor on 11 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the MP1584EN.
What parts are used alongside the MP1584EN?
The AMS1117-3.3, USBLC6-2SC6, MPU-6050, MT3608 and STM32H743VIT6 appear in the most repositories here.
Which microcontrollers do boards using the MP1584EN use?
Most are built on ESP32 (8), STM32 (6), AVR/Arduino (3) and ESP8266 (1).
How big is a typical board using the MP1584EN?
The median is 79.8 × 60 mm, and 80% are two-layer designs.
What is the most popular open source board using the MP1584EN?
By GitHub stars, Open mabel by robotmabel, with 41 stars.
Can I simulate one of these boards using the MP1584EN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.