DumbFCC
Curtis-05·DumbFCC
About the DumbFCC PCB
DumbFCC is an open source STM32 PCB design by Curtis-05, published on GitHub under the MIT license. It is a 4-layer board measuring 70 × 50 mm, with 71 components from 41 distinct parts.
Its main chip is the STM32H573RIT6, from the STM32 family. Other key parts include the ADP3330ARTZ3.3-RL7, LIS2MDL, LSM6DSL, MS5607-02BA and SST26VF064BT-104I/SM. By type, the board carries 21 capacitors, 19 resistors, 10 connectors, 8 diodes, 7 ICs and 2 switches.
It belongs with the robotics & motion designs in this gallery.
From the project
Custom Flight controller for ENG 4012 Aerospace Design Project 4 2025/26 via Glasgow University.
. ├─ Computations # Misc calculations ├─ HTML # HTML files for generated webpage ├─ Images # Pictures and renders │ ├─ kibotresources # External resources for KiBot │ ├─ colors # Color theme for KiCad │ ├─ fonts # Fonts used in the project │ ├─ scripts # External scripts used with KiBot │ └─ templates # Templates for KiBot generated reports │ ├─ kibotyaml # KiBot YAML config files ├─ KiRI # KiRI (PCB diff viewer) files │ ├─ lib # KiCad footprint and symbol libraries │ ├─ 3dmodels # Component 3D models │ ├─ libfp # Footprint libraries │ └─ lib_sym # Symbol libraries │ ├─ Logos # Logos │ ├─…

Main components on the DumbFCC
DumbFCC bill of materials (BOM)
71 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADP3330ARTZ3.3-RL7 | SOT-23-6 | U100 |
| 1 | STM32H573RIT6 | LQFP-64_10x10mm_P0.5mm | U200 |
| 1 | LIS2MDL | LGA-12_2x2mm_P0.5mm | U300 |
| 1 | LSM6DSL | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U301 |
| 1 | MS5607-02BA | LGA-8_3x5mm_P1.25mm | U302 |
| 1 | SST26VF064BT-104I/SM | SOIC-8_5.3x5.3mm_P1.27mm | U400 |
| 1 | MCP2562T-E_SN Microchip | SOIC-8_3.9x4.9mm_P1.27mm | U500 |
| 1 | 25MHZ 25MHz | Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y200 |
| 1 | 5V Input | PinHeader_1x02_P2.54mm_Vertical | J100 |
| 1 | Distance Sensor | PinHeader_1x04_P2.54mm_Vertical | J300 |
| 1 | SD port | MOLEX_5027740891 | J402 |
| 1 | Debug | PinHeader_1x04_P2.54mm_Vertical | J500 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J501 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J502 |
| 1 | CAN port | PinHeader_1x02_P2.54mm_Vertical | J503 |
| 1 | Motor | PinHeader_2x03_P2.54mm_Vertical | J504 |
| 1 | Gimbal | PinHeader_2x03_P2.54mm_Vertical | J505 |
| 1 | USB C | 2171790001_MOL | J506 |
| 1 | Buzzer | XDCR_AI-1027-TWT-3V-R | BZ400 |
| 1 | Boot | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP200 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Mode Switch | SW_DS04-254-1-02BK-SMT | SW400 |
| 1 | Reset | DTS32NVB | SW401 |
| 1 | PWR | LED_0805_2012Metric | D100 |
| 1 | FLT | LED_0805_2012Metric | D400 |
| 1 | DBG | LED_0805_2012Metric | D401 |
| 1 | VER | LED_0805_2012Metric | D402 |
| 1 | SBY | LED_0805_2012Metric | D403 |
| 1 | ERR | LED_0805_2012Metric | D404 |
| 1 | ESDA6V1L-TP ESDA6V1l-tp | SOT-23-3 | D500 |
| 1 | D_Schottky | P25_DO-214AC_SMA | D501 |
| 1 | FerriteBead | L_0805_2012Metric | FB500 |
| 2 | 470N 470n | C_0805_2012Metric | C100, C101 |
| 2 | 10U 10u | CP_Elec_4x5.7 | C200, C307 |
| 14 | 100N 100n | C_0805_2012Metric | C201, C202, C203, C204, C205, C300, C304, C305 +6 |
| 2 | 10P 10p | C_0805_2012Metric | C207, C208 |
| 1 | 220N 220n | C_0805_2012Metric | C303 |
| 6 | 330 | R_0805_2012Metric | R100, R402, R403, R404, R405, R406 |
| 1 | 620 | R_0805_2012Metric | R200 |
| 9 | 10K 10k | R_0805_2012Metric | R201, R300, R301, R302, R303, R400, R401, R500 +1 |
| 1 | 120 | R_0805_2012Metric | R502 |
| 2 | 5K1 5k1 | R_0805_2012Metric | R503, R504 |
DumbFCC design files
The KiCad project lives in the Curtis-05/DumbFCC repository on GitHub; these links point at the commit this page was built from.
- LayoutDumbFCC.kicad_pcb
- SchematicDumbFCC.kicad_sch
- BOMManufacturing/Assembly/DumbFCC-bom.csv
DumbFCC: common questions
What microcontroller does the DumbFCC use?
The DumbFCC is built around the STM32H573RIT6, from the STM32 family.
How big is the DumbFCC PCB?
The DumbFCC measures 70 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DumbFCC?
71 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DumbFCC design files?
From the Curtis-05/DumbFCC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DumbFCC design in my own project?
Yes, under the terms of its MIT license, which Curtis-05 chose for the repository.
Can I test firmware for the DumbFCC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k