23 open source boards using the LSM6DSL

Real designs built with the LSM6DSL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the LSM6DSL

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the LSM6DSL connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 14 of 14 designs, most often 100 nF (then 4.7 µF).
  • The VDDIO pin has a decoupling capacitor on 13 of 14 designs, most often 100 nF (then 4.7 µF).
  • The SCL pin has a pull-up to 3.3V on 10 of 14 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SDA pin has a pull-up to 3.3V on 10 of 14 designs, most often 10 kΩ (then 4.7 kΩ).
VDDIOpin 5Connected to: 3.3V 93%
  • Decoupling capacitor on 93% · 100 nF (21), 4.7 µF (6), 10 µF (3)
GNDpin 6, 7Connected to: GND 100%
VDDpin 8Connected to: 3.3V 79% · a signal 21%
  • Decoupling capacitor on 100% · 100 nF (21), 4.7 µF (6), 10 µF (4)
NCpin 10, 11Connected to: Not connected 100%
CSpin 12Connected to: 3.3V 64% · a signal 36%
SCLpin 13Connected to: The microcontroller 64%, a connector 57%
  • Pull-up to 3.3V on 71% · 10 kΩ (5), 4.7 kΩ (2), 5.1 kΩ (1)
SDApin 14Connected to: The microcontroller 64%, a connector 57%
  • Pull-up to 3.3V on 71% · 10 kΩ (5), 4.7 kΩ (2), 5.1 kΩ (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Froggyswadge by cnlohr, Gk by jncronin, MyoBand Main by SonDinh23 and CheetoPet by Cheet0sDelet0s.

The LSM6DSL in open source designs

The gallery holds 23 open source boards using the LSM6DSL from 15 GitHub repositories; a typical one measures about 61.6 × 49.1 mm and carries around 92 components.

57% use four copper layers or more, and 26% carry an open source license.

The most starred is Froggyswadge by cnlohr.

Microcontrollers on boards using the LSM6DSL

LSM6DSL: common questions

Where can I find a LSM6DSL reference design?

Each of the 23 boards on this page is a real design using the LSM6DSL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LSM6DSL VDD pin?

The VDD pin has a decoupling capacitor on 14 of 14 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 14 open source designs using the LSM6DSL.

What decoupling capacitors do designs use on the LSM6DSL VDDIO pin?

The VDDIO pin has a decoupling capacitor on 13 of 14 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 14 open source designs using the LSM6DSL.

What pull-up resistor is used on the LSM6DSL SCL pin?

The SCL pin has a pull-up to 3.3V on 10 of 14 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 14 open source designs using the LSM6DSL.

What parts are used alongside the LSM6DSL?

The LIS2MDL, BME680, CP2102N-Axx-xQFN28, DS3231M and ESP32-PICO-V3-02 appear in the most repositories here.

Which microcontrollers do boards using the LSM6DSL use?

Most are built on STM32 (10), ESP32 (7), RP2040/RP2350 (2) and AVR/Arduino (1).

How big is a typical board using the LSM6DSL?

The median is 61.6 × 49.1 mm, and 43% are two-layer designs.

What is the most popular open source board using the LSM6DSL?

By GitHub stars, Froggyswadge by cnlohr, with 105 stars.

Can I simulate one of these boards using the LSM6DSL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part