3 open source boards using the MCP2562T-E/SN
Real designs built with the MCP2562T-E/SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
MotionModuleSTM32R8
griffotron
187.9 × 60.2 mm240 parts4LMIT13STM32
DumbFCC
Curtis-05
70 × 50 mm71 parts4LMIT0ESP32
LTC6811 ESP32 Master V6P1
tetra-aero
200 × 55 mm323 parts2LGPL-3.00
The MCP2562T-E/SN in open source designs
The gallery holds 3 open source boards using the MCP2562T-E/SN from 3 GitHub repositories; a typical one measures about 187.9 × 55 mm and carries around 240 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is MotionModuleSTM32R8 by griffotron.
What boards using the MCP2562T-E/SN are built for
MCP2562T-E/SN: common questions
Where can I find a MCP2562T-E/SN reference design?
Each of the 3 boards on this page is a real design using the MCP2562T-E/SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP2562T-E/SN use?
Most are built on STM32 (2) and ESP32 (1).
How big is a typical board using the MCP2562T-E/SN?
The median is 187.9 × 55 mm, and 33% are two-layer designs.
What is the most popular open source board using the MCP2562T-E/SN?
By GitHub stars, MotionModuleSTM32R8 by griffotron, with 13 stars.
Can I simulate one of these boards using the MCP2562T-E/SN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.