Electrovalves module
CV19CO·open_controller_for_ventilator·electrovalve_module/electrovalves_module.kicad_pcb
About the Electrovalves module
Electrovalves module is an open source PCB design by CV19CO, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 45.6 × 25.4 mm, with 8 components from 8 distinct parts.
By type, the board carries 3 connectors, 3 resistors, 1 transistor and 1 diode.
From the project
Open source controller for ventilators

Electrovalves module bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PN2222 IRF540N | TO-220-3_Vertical | Q1 |
| 1 | CONN_02X04_ODD_EVEN Conn_01x02_Male | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | 1757284 Conn_01x02_Male | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | CONN_02X11_ODD_EVEN Conn_01x02_Female | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | D_SCHOTTKY_X2_SERIAL_AKC 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 20k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10K 5.1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 47K 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Electrovalves module design files
The KiCad project lives in the CV19CO/open_controller_for_ventilator repository on GitHub; these links point at the commit this page was built from.
Electrovalves module: common questions
How big is the Electrovalves module?
The Electrovalves module measures 45.6 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Electrovalves module?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Electrovalves module design files?
From the CV19CO/open_controller_for_ventilator repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Electrovalves module design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which CV19CO chose for the repository.
More boards in open_controller_for_ventilator
FPGA
Keep breathing ctrl
CV19CO
153 × 148 mm248 parts4LCERN-OHL-P-2.05Pressure sensors
CV19CO
100 × 100 mm10 parts4LCERN-OHL-P-2.05Pressure sensor module
CV19CO
29 × 29.5 mm10 parts4LCERN-OHL-P-2.05.sensor oxigeno
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05ABPDANT060MGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05403SFM3020 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05ABPDJJT001PGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05ABPDANT015PGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05ABPDJJT001PDSA3 sensor module
CV19CO
29 × 29.5 mm4 parts4LCERN-OHL-P-2.05