Pressure sensors
CV19CO·open_controller_for_ventilator·4_in_1_pressure_sensors/pressure_sensors.kicad_pcb
About the Pressure sensors PCB
Pressure sensors is an open source PCB design by CV19CO, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 100 × 100 mm, with 10 components from 10 distinct parts.
Other key parts include the MPL3115A2 and POWERSTEP01. By type, the board carries 4 capacitors, 2 ICs, 2 connectors and 2 resistors.
It belongs with the sensors designs in this gallery.
From the project
Open source controller for ventilators

Main components on the Pressure sensors
Pressure sensors bill of materials (BOM)
10 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPL3115A2 ABPDJJ001PDSA3 | DIP_JJ | U1 |
| 1 | POWERSTEP01 LM358 | TSSOP-8_4.4x3mm_P0.65mm | U2 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical_SMD | J1 |
| 1 | 1757284 Conn_02x07_Odd_Even | PinHeader_2x07_P2.54mm_Vertical_SMD | J2 |
| 1 | 22UF 0.1u | C_0603_1608Metric | C1 |
| 1 | 478-9924-1 1n | C_0603_1608Metric | C2 |
| 1 | 478-9924-1 0.1u | C_0603_1608Metric | C3 |
| 1 | 220NF 0.1u | C_0603_1608Metric | C4 |
| 1 | 11k3 | R_0603_1608Metric | R1 |
| 1 | 10K 22k | R_0603_1608Metric | R2 |
Pressure sensors design files
The KiCad project lives in the CV19CO/open_controller_for_ventilator repository on GitHub; these links point at the commit this page was built from.
Pressure sensors: common questions
How big is the Pressure sensors PCB?
The Pressure sensors measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pressure sensors?
10 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pressure sensors design files?
From the CV19CO/open_controller_for_ventilator repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pressure sensors design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which CV19CO chose for the repository.
More boards in open_controller_for_ventilator
FPGA
Keep breathing ctrl
CV19CO
153 × 148 mm248 parts4LCERN-OHL-P-2.05Pressure sensor module
CV19CO
29 × 29.5 mm10 parts4LCERN-OHL-P-2.05ABPDANT015PGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05.sensor oxigeno
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05ABPDANT060MGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05403SFM3020 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05ABPDJJT001PGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05Electrovalves module
CV19CO
45.6 × 25.4 mm8 parts2LCERN-OHL-P-2.05ABPDJJT001PDSA3 sensor module
CV19CO
29 × 29.5 mm4 parts4LCERN-OHL-P-2.05
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956