403SFM3020 sensor module
CV19CO·open_controller_for_ventilator·403SFM3020_sensor/403SFM3020_sensor_module.kicad_pcb
About the 403SFM3020 sensor module
403SFM3020 sensor module is an open source PCB design by CV19CO, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 29 × 29.5 mm, with 9 components from 8 distinct parts.
Other key parts include the LM358. By type, the board carries 3 connectors, 3 capacitors, 2 resistors and 1 IC.
It belongs with the sensors designs in this gallery.
From the project
Open source controller for ventilators
Main components on the 403SFM3020 sensor module
403SFM3020 sensor module bill of materials (BOM)
9 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | TSSOP-8_4.4x3mm_P0.65mm | U2 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical_SMD | J1 |
| 1 | CONN_02X07_ODD_EVEN Conn_02x07_Odd_Even | PinHeader_2x07_P2.54mm_Vertical_SMD | J2 |
| 1 | CONN_01X05_FEMALE Conn_01x05_Female | MOLEX_5600200430 | J3 |
| 2 | 0.1U 0.1u | C_0603_1608Metric | C1, C3 |
| 1 | 1n | C_0603_1608Metric | C2 |
| 1 | 11K3 11k3 | R_0603_1608Metric | R1 |
| 1 | 22K 22k | R_0603_1608Metric | R2 |
403SFM3020 sensor module design files
The KiCad project lives in the CV19CO/open_controller_for_ventilator repository on GitHub; these links point at the commit this page was built from.
403SFM3020 sensor module: common questions
How big is the 403SFM3020 sensor module?
The 403SFM3020 sensor module measures 29 × 29.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 403SFM3020 sensor module?
9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 403SFM3020 sensor module design files?
From the CV19CO/open_controller_for_ventilator repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the 403SFM3020 sensor module design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which CV19CO chose for the repository.
More boards in open_controller_for_ventilator
FPGA
Keep breathing ctrl
CV19CO
153 × 148 mm248 parts4LCERN-OHL-P-2.05Pressure sensor module
CV19CO
29 × 29.5 mm10 parts4LCERN-OHL-P-2.05Pressure sensors
CV19CO
100 × 100 mm10 parts4LCERN-OHL-P-2.05ABPDANT060MGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05.sensor oxigeno
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05ABPDJJT001PGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05ABPDANT015PGAA5 sensor module
CV19CO
29 × 29.5 mm9 parts4LCERN-OHL-P-2.05Electrovalves module
CV19CO
45.6 × 25.4 mm8 parts2LCERN-OHL-P-2.05ABPDJJT001PDSA3 sensor module
CV19CO
29 × 29.5 mm4 parts4LCERN-OHL-P-2.05
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956