Usbchargerpanel12
cvanbibber·USB-Charger
About the Usbchargerpanel12 PCB
Usbchargerpanel12 is an open source PCB design by cvanbibber, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 200 × 99.1 mm, with 17 components from 14 distinct parts.
Other key parts include the TLV61070ADBV. By type, the board carries 5 resistors, 3 connectors, 3 diodes, 2 capacitors, 1 IC and 1 battery holder.
It belongs with the power & battery designs in this gallery.
From the project
A simple USB charger board for soldering, with USB-C bidirectional port, USB-A, and micro-USB as an introduction to pcb design and usb standards.
Main components on the Usbchargerpanel12
Usbchargerpanel12 bill of materials (BOM)
17 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV61070ADBV | SOT-23-6 | U1 |
| 1 | USB_B_Micro | CONN_10118192-0002LF_AMP | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | USB_A | USB_A_Molex_67643_Horizontal | J3 |
| 1 | Battery_Cell | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Polyfuse | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 2 | D_Schottky | D_SMA_Handsoldering | D1, D2 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | 4.7U 4.7u | TMPA 1005SV-4R7MN-D | L1 |
| 1 | 4.7U 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 22UF 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 91K 91k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R5 |
| 1 | 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
Usbchargerpanel12 design files
The KiCad project lives in the cvanbibber/USB-Charger repository on GitHub; these links point at the commit this page was built from.
Usbchargerpanel12: common questions
How big is the Usbchargerpanel12 PCB?
The Usbchargerpanel12 measures 200 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usbchargerpanel12?
17 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usbchargerpanel12 design files?
From the cvanbibber/USB-Charger repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Usbchargerpanel12 design in my own project?
Yes, under the terms of its GPL-3.0 license, which cvanbibber chose for the repository.
More boards in USB-Charger
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k