Tetriscard
Cybdo·tetriscard
About the Tetriscard PCB
Tetriscard is an open source ESP32 PCB design by Cybdo, published on GitHub. It is a 4-layer board measuring 54 × 85.6 mm, with 233 components from 12 distinct parts.
Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the MCP1700X-330XXTT. By type, the board carries 202 diodes, 21 resistors, 3 connectors, 3 capacitors, 2 ICs and 2 switches.
It belongs with the wearables designs in this gallery.
From the project
TETRISCARD - credit card sized tetris machine!!
TETRISCARD - credit card sized tetris machine!!
ESP32-C6 based, battery powered 20x10 LED matrix
Main components on the Tetriscard
Tetriscard bill of materials (BOM)
233 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700X-330XXTT MCP1700x-330xxTT | SOT-23 | U0 |
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U1 |
| 2 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J0, J1 |
| 1 | USB_C_PLUG_USB2.0 USB_C_Plug_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P0 |
| 2 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW0, SW1 |
| 200 | LED | LED_0402_1005Metric no ref | D0, D1, D2, D3, D4, D5, D6, D7 +192 |
| 2 | 1N5819WS | D_SOD-323 | D201, D202 |
| 2 | 100NF 100nF | C_0603_1608Metric | C0, C2 |
| 1 | 10UF 10uF | C_0603_1608Metric | C1 |
| 15 | 150R | R_0402_1005Metric | R0, R1, R2, R3, R4, R5, R6, R7 +7 |
| 2 | 1KR 1kR | R_0402_1005Metric | R15, R18 |
| 4 | 10KR 10kR | R_0402_1005Metric | R16, R17, R19, R20 |
Tetriscard design files
The KiCad project lives in the Cybdo/tetriscard repository on GitHub; these links point at the commit this page was built from.
- Layoutbadge.kicad_pcb
- Schematicbadge.kicad_sch
- BOMproduction/bom.csv
Tetriscard: common questions
What microcontroller does the Tetriscard use?
The Tetriscard is built around the ESP32-C6-MINI-1, from the ESP32 family.
How big is the Tetriscard PCB?
The Tetriscard measures 54 × 85.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Tetriscard?
233 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tetriscard design files?
From the Cybdo/tetriscard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tetriscard design in my own project?
The repository has no license, so all rights stay with Cybdo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tetriscard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k