Mumo

cyberpsychozz·slmvr-gaitlab·research/slmvr-rev1.9-2026-11-07/references/kounocom__Mumo/Mumo.kicad_pcb

Mumo PCB layout, top view — open source board by cyberpsychozz

About the Mumo PCB

Mumo is an open source PCB design by cyberpsychozz, published on GitHub. It is a 4-layer board measuring 18 × 13 mm, with 12 components from 7 distinct parts.

Other key parts include the C49327200, C22459454 and C709192. By type, the board carries 6 resistors, 3 ICs and 3 capacitors.

From the project

A compact 13×18mm IMU module featuring the TDK InvenSense ICM-45686 6-axis IMU with integrated 32.768kHz clock and QST QMC6309H 3-axis magnetometer.

A compact 13×18mm IMU module featuring the TDK InvenSense ICM-45686 6-axis IMU with integrated 32.768kHz clock and QST QMC6309H 3-axis magnetometer.

- Compact Design: 13×18mm form factor - High-Performance IMU: TDK InvenSense ICM-45686 6-axis IMU with integrated 32.768kHz clock for precise output timesteps - 3-Axis Magnetometer: QST QMC6309H for 9-DOF sensing - Connectivity: Castellated holes for flat mounting on compatible carrier PCBs - Power Optimization: Solder bridges to disconnect I2C pull-ups for improved power efficiency when using SPI - Easily Configurable I2C Address: Solder bridge…

Mumo, from the project README
From the project README

Main components on the Mumo

Mumo bill of materials (BOM)

12 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C49327200
QMC6309H
U1
1
C22459454
ICM45686
U2
1
C709192
1532H
U3
2
C1525
100nF
C1, C2
1
C57895
2.2uF
C3
2
C25744
10k
R1, R2
4
C25900
4k7
R3, R4, R5, R6

Mumo design files

The KiCad project lives in the cyberpsychozz/slmvr-gaitlab repository on GitHub; these links point at the commit this page was built from.

Mumo: common questions

How big is the Mumo PCB?

The Mumo measures 18 × 13 mm, has 4 copper layers and is 1.2 mm thick.

How many components are on the Mumo?

12 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mumo design files?

From the cyberpsychozz/slmvr-gaitlab repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mumo design in my own project?

The repository has no license, so all rights stay with cyberpsychozz. Use it as a reference, and ask the author before reusing the design.

More boards in slmvr-gaitlab