5 open source boards using the C22459454
Real designs built with the C22459454, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Mumo
kounocom
18 × 13 mm12 parts4LCERN-OHL-S-2.040Nordic nRF
Fuimini-V2
Zipra1
15 × 29.2 mm59 parts4LCERN-OHL-S-2.03ESP32
Hub
cUDGk
60 × 48 mm55 parts2LCustom license0Nordic nRF
Fuimini-V2-LSM6DSV
Zipra1
15 × 29.2 mm59 parts4LCERN-OHL-S-2.03RISC-V
Node
cUDGk
32 × 29 mm20 parts2LCustom license0
The C22459454 in open source designs
The gallery holds 5 open source boards using the C22459454 from 3 GitHub repositories; a typical one measures about 18 × 29.2 mm and carries around 55 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is Mumo by kounocom.
Microcontrollers on boards using the C22459454
What boards using the C22459454 are built for
C22459454: common questions
Where can I find a C22459454 reference design?
Each of the 5 boards on this page is a real design using the C22459454. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C22459454 use?
Most are built on Nordic nRF (2), ESP32 (1) and RISC-V (1).
How big is a typical board using the C22459454?
The median is 18 × 29.2 mm, and 40% are two-layer designs.
What is the most popular open source board using the C22459454?
By GitHub stars, Mumo by kounocom, with 40 stars.
Can I simulate one of these boards using the C22459454 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.