RSC-LV3-Dash
cyfinfaza·RSC-LV3-Dash
About the RSC-LV3-Dash PCB
RSC-LV3-Dash is an open source STM32 PCB design by cyfinfaza, published on GitHub. It is a 2-layer board measuring 90 × 50 mm, with 93 components from 37 distinct parts.
Its main chip is the STM32H743VITX, from the STM32 family. Other key parts include the TJA1051T-3, LMR51625YFDDCR, TLV74033PDBVR, AP3032KTR and AMS1117-3.3. By type, the board carries 31 capacitors, 28 resistors, 11 diodes, 8 connectors, 6 ICs and 3 inductors.
It belongs with the audio, displays & leds and power & battery designs in this gallery.
From the project
Hardware design for Rutgers Solar Car LV3 system dashboard, with STM32H743, parallel RGB display, backlight driver, 5-48V, CAN-FD, SD card, and I2S/SAI
Main components on the RSC-LV3-Dash
RSC-LV3-Dash bill of materials (BOM)
93 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H743VITX STM32H743VITx | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | TJA1051T-3 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LMR51625YFDDCR LMR51625YDDCR | SOT95P280X110-6N | U4 |
| 1 | TLV74033PDBVR | SOT95P280X145-5N | U5 |
| 1 | AP3032KTR | SOT-23-6 | U6 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | FTSH-105-01-L-DV-K-A | FTSH-105-XX-YYY-DV-K-A | J2 |
| 1 | CONN_01X04_MOUNTINGPIN Conn_01x04_MountingPin | Molex_Micro-Fit_3.0_43650-0410_1x04-1MP_P3.00mm_Horizontal | J3 |
| 1 | CONN_01X05_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | CONN_01X05_MOUNTINGPIN Conn_01x05_MountingPin | Molex_Micro-Fit_3.0_43650-0510_1x05-1MP_P3.00mm_Horizontal | J5 |
| 1 | MSD-11-A | MSD11A | J6 |
| 1 | 62684-401100AHLF | 62684401100AHLF | J7 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | *R23 |
| 2 | Polyfuse | Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1, F2 |
| 2 | RKB2SJM250SMTR LFS RKB2SJM250SMTR_LFS | RKB2SJM250SMTRLFS | S1, S2 |
| 2 | PESD2USB3UV | SOT-23W | D1, D11 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D4 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | D_Zener | D_SOD-323_HandSoldering | D3, D8 |
| 5 | D_Schottky | D_SOD-123F | D5, D6, D7, D9, D10 |
| 1 | L_Ferrite | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 2 | 6.8U 6.8u | L_Bourns-SRN4018 | L2, L3 |
| 13 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C8, C11, C12 +5 |
| 7 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C16, C20, C25, C30, C34 |
| 2 | 6.8P 6.8p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 5 | 2.2U 2.2u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C14, C26, C27, C33 |
| 4 | 22U 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C23, C24, C31, C32 |
| 17 | 5.1K 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R7, R8, R9, R10 +9 |
| 2 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R17 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 4 | 100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R18, R21, R22 |
| 1 | 17.4K 17.4k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | 100M 100m | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R20 |
| 1 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
RSC-LV3-Dash design files
The KiCad project lives in the cyfinfaza/RSC-LV3-Dash repository on GitHub; these links point at the commit this page was built from.
- LayoutLV3-Dash.kicad_pcb
- SchematicLV3-Dash.kicad_sch
- BOMLV3-Dash-BOM-Exported.csv
RSC-LV3-Dash: common questions
What microcontroller does the RSC-LV3-Dash use?
The RSC-LV3-Dash is built around the STM32H743VITX, from the STM32 family.
How big is the RSC-LV3-Dash PCB?
The RSC-LV3-Dash measures 90 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RSC-LV3-Dash?
93 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RSC-LV3-Dash design files?
From the cyfinfaza/RSC-LV3-Dash repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RSC-LV3-Dash design in my own project?
The repository has no license, so all rights stay with cyfinfaza. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RSC-LV3-Dash without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k