-1
CYT-ks·-1
About the -1 PCB
-1 is an open source STM32 PCB design by CYT-ks, published on GitHub. It is a 2-layer board measuring 116.8 × 106.7 mm, with 51 components from 23 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the HX9193, TJA1051T-3, CH340E and AD8400ARZ50. By type, the board carries 19 capacitors, 11 resistors, 7 connectors, 5 ICs, 4 switches and 3 diodes.
From the project
zuoye
Main components on the -1
-1 bill of materials (BOM)
51 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HX9193 | SOT-23-5_HandSoldering | U1 |
| 1 | TJA1051T-3 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | AD8400ARZ50 | SOP-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | — | TSOT-23 | Q1 |
| 1 | 12M | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | — | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02 | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_01x19 | PinHeader_1x19_P2.54mm_Vertical | J4 |
| 1 | Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J5 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 4 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2, SW3, SW4 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 2 | 10u | C_0603_1608Metric | C1, C3 |
| 15 | 100n | C_0603_1608Metric | C2, C4, C5, C6, C7, C8, C9, C10 +7 |
| 2 | 18p | C_0603_1608Metric | C14, C15 |
| 4 | 1K | R_0603_1608Metric | R1, R6, R7, R8 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10k | R_0603_1608Metric | R2, R4, R5 |
| 1 | 120 | R_0603_1608Metric | R3 |
| 3 | R | R_0603_1608Metric | R9, R10, R11 |
-1 design files
The KiCad project lives in the CYT-ks/-1 repository on GitHub; these links point at the commit this page was built from.
- Layout第一次考核(改进版).kicad_pcb
-1: common questions
What microcontroller does the -1 use?
The -1 is built around the STM32F103C8T6, from the STM32 family.
How big is the -1 PCB?
The -1 measures 116.8 × 106.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the -1?
51 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the -1 design files?
From the CYT-ks/-1 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the -1 design in my own project?
The repository has no license, so all rights stay with CYT-ks. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the -1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k