108 open source boards using the CH340E

Real designs built with the CH340E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

108 boardsClear filters|Most starred

How designs wire the CH340E

Read from the KiCad layouts of 82 open source designs, one per repository: what each pin of the CH340E connects to, and the resistors, capacitors and other passives placed on it.

  • The V3 pin has a decoupling capacitor on 73 of 81 designs, most often 100 nF (then 470 nF).
  • The VCC pin has a decoupling capacitor on 71 of 81 designs, most often 100 nF (then 470 nF).
  • The CTS pin is left unconnected on 65 of 81 designs (a signal on 16).
  • The TNOW pin is left unconnected on 58 of 81 designs (a signal on 22).
GNDpin 3Connected to: GND 96%
RTSpin 4Connected to: Not connected 68% · a signal 31%
CTSpin 5Connected to: Not connected 80% · a signal 20%
TNOWpin 6Connected to: Not connected 72% · a signal 27%
VCCpin 7Connected to: 3.3V 88%
  • Decoupling capacitor on 88% · 100 nF (67), 470 nF (21), 10 µF (18)
V3pin 10Connected to: 3.3V 64% · a signal 32%
  • Decoupling capacitor on 90% · 100 nF (69), 470 nF (20), 10 µF (15)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open smartwatch light by Open-Smartwatch, Open smartwatch gps by Open-Smartwatch, Breadbee by breadbee and M5Pi-F1C100S/200S by imliubo.

The CH340E in open source designs

The gallery holds 108 open source boards using the CH340E from 83 GitHub repositories; a typical one measures about 53.5 × 50 mm and carries around 51 components.

68% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is Open smartwatch light by Open-Smartwatch.

Microcontrollers on boards using the CH340E

CH340E: common questions

Where can I find a CH340E reference design?

Each of the 108 boards on this page is a real design using the CH340E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the CH340E V3 pin?

The V3 pin has a decoupling capacitor on 73 of 81 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 82 open source designs using the CH340E.

What decoupling capacitors do designs use on the CH340E VCC pin?

The VCC pin has a decoupling capacitor on 71 of 81 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 82 open source designs using the CH340E.

How is the CH340E CTS pin connected?

The CTS pin is left unconnected on 65 of 81 designs (a signal on 16). Counted from the KiCad layouts of 82 open source designs using the CH340E.

What parts are used alongside the CH340E?

The USBLC6-2SC6, SPX3819M5-L-3-3, MSPM0G3507SPTR, AMS1117-3.3 and MCP73831T-2ACI/OT appear in the most repositories here.

Which microcontrollers do boards using the CH340E use?

Most are built on STM32 (19), AVR/Arduino (18), ESP32 (5) and RISC-V (2).

How big is a typical board using the CH340E?

The median is 53.5 × 50 mm, and 68% are two-layer designs.

What is the most popular open source board using the CH340E?

By GitHub stars, Open smartwatch light by Open-Smartwatch, with 248 stars.

Can I simulate one of these boards using the CH340E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part