Luminometer ADC
czbiohub-sf·portable-luminometer·Electronics design/Luminometer_ADC/Luminometer_ADC.kicad_pcb
About the Luminometer ADC PCB
Luminometer ADC is an open source PCB design by czbiohub-sf, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 65 × 50 mm, with 59 components from 21 distinct parts.
Other key parts include the LT3464, ADA4522-1, ADR512, ADA4522-4 and LP5907MFX-3. By type, the board carries 28 resistors, 20 capacitors, 7 ICs, 1 connector and 1 inductor.
It belongs with the sensors and test & measurement designs in this gallery.
From the project
Software and electronics for the portable SiPM luminometer.
Link to preprint: https://www.medrxiv.org/content/10.1101/2023.05.18.23290120v1
Like many assays, the split-luciferase assay was developed on a high-performance benchtop luminometer with sub-attomole limit of detection for luciferase. Unfortunately, there is an orders-of-magnitude performance gap between these devices and available handheld luminometers. The need for the equivalent performance level but in a robust, handheld format was identified by Cristina Tato, and together with Senjuti Saha at CHRF Dhaka, is leading an effort to map coronavirus immunity across rural regions in Bangladesh.
Main components on the Luminometer ADC
Luminometer ADC bill of materials (BOM)
59 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT3464 | SOT-23-8 | U1 |
| 1 | ADA4522-1 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 2 | ADR512 | SOT-23 | U3, U4 |
| 1 | ADA4522-4 | SOIC-14_W3.9mm | U5 |
| 1 | LP5907MFX-3 | SOT-23-5 | U6 |
| 1 | ADS131M08IPBS | LQFP-32_5x5mm_P0.5mm | U7 |
| 1 | Harting__15210122401000 | Harting_15210122401000 | J1 |
| 2 | MICROFC−60035−SMT | OnSemi_CASE512 | SiPM1, SiPM2 |
| 1 | — | L_1212_3030Metric | L1 |
| 8 | 1uF | C_0603_1608Metric | C1, C7, C8, C9, C10, C11, C14, C17 |
| 6 | 220nF | C_0603_1608Metric | C2, C3, C5, C6, C15, C16 |
| 1 | 330nF | C_0603_1608Metric | C4 |
| 5 | 10nF | C_0603_1608Metric | C12, C13, C18, C19, C20 |
| 12 | 1k | R_0603_1608Metric | R1, R12, R13, R14, R15, R18, R23, R24 +4 |
| 3 | 25k | R_0603_1608Metric | R2, R6, R7 |
| 3 | 2.7M | R_0603_1608Metric | R3, R19, R21 |
| 3 | 100k | R_0603_1608Metric | R4, R20, R22 |
| 1 | 180R | R_0603_1608Metric | R5 |
| 4 | 2k | R_0603_1608Metric | R8, R9, R10, R11 |
| 1 | 470 | R_0603_1608Metric | R16 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470R | R_0603_1608Metric | R17 |
Luminometer ADC design files
The KiCad project lives in the czbiohub-sf/portable-luminometer repository on GitHub; these links point at the commit this page was built from.
Luminometer ADC: common questions
How big is the Luminometer ADC PCB?
The Luminometer ADC measures 65 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Luminometer ADC?
59 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Luminometer ADC design files?
From the czbiohub-sf/portable-luminometer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Luminometer ADC design in my own project?
Yes, under the terms of its BSD-3-Clause license, which czbiohub-sf chose for the repository.
More boards in portable-luminometer
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kSensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k