Luminometer RPi
czbiohub-sf·portable-luminometer·Electronics design/Luminometer_RPi/Luminometer_RPi.kicad_pcb
About the Luminometer RPi PCB
Luminometer RPi is an open source PCB design by czbiohub-sf, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 75.3 × 50 mm, with 45 components from 19 distinct parts.
Other key parts include the DRV8833PWP and 296-46565-1-ND. By type, the board carries 13 capacitors, 9 resistors, 7 connectors, 5 inductors, 4 switches and 3 ICs.
It belongs with the sensors and test & measurement designs in this gallery.
From the project
Software and electronics for the portable SiPM luminometer.
Link to preprint: https://www.medrxiv.org/content/10.1101/2023.05.18.23290120v1
Like many assays, the split-luciferase assay was developed on a high-performance benchtop luminometer with sub-attomole limit of detection for luciferase. Unfortunately, there is an orders-of-magnitude performance gap between these devices and available handheld luminometers. The need for the equivalent performance level but in a robust, handheld format was identified by Cristina Tato, and together with Senjuti Saha at CHRF Dhaka, is leading an effort to map coronavirus immunity across rural regions in Bangladesh.
Main components on the Luminometer RPi
Luminometer RPi bill of materials (BOM)
45 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8833PWP | TSSOP-16-1EP_W4.40mm | U1 |
| 2 | 296-46565-1-ND | SOT-23-6 | U2, U3 |
| 3 | IRLML6344TRPBF | SOT-23-3 | Q1, Q2, Q3 |
| 1 | PMIC_header_right_angle | PMIC_Header | J1 |
| 5 | H2191-ND | Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical | J2, J3, J5, J6, J8 |
| 1 | Harting_15110122601000 | Harting_15110122601000 | J7 |
| 1 | 668-SMI-1027-T-5V-RCT-ND | 668-SMI-1027-T-5V-RCT-ND | BZ1 |
| 3 | B3F-3152 | B3F3152 | SW1, SW2, SW3 |
| 1 | AS11CH | AS11CH | SW4 |
| 3 | Ferrite_Bead_Small | R_0603_1608Metric | FB1, FB2, FB3 |
| 2 | 732-4872-1-ND | L_1212_3030Metric | L1, L2 |
| 7 | 10nF | C_0603_1608Metric | C1, C4, C5, C7, C9, C10, C11 |
| 1 | 2.2uF | C_0603_1608Metric | C2 |
| 1 | 47uF | C_0603_1608Metric | C3 |
| 2 | 100nF | C_0603_1608Metric | C6, C13 |
| 2 | 10uF | C_0603_1608Metric | C8, C12 |
| 2 | 180R | R_0603_1608Metric | R1, R6 |
| 5 | 10k | R_0603_1608Metric | R2, R3, R9, R10, R11 |
| 2 | 200m | R_0603_1608Metric | R7, R8 |
Luminometer RPi design files
The KiCad project lives in the czbiohub-sf/portable-luminometer repository on GitHub; these links point at the commit this page was built from.
Luminometer RPi: common questions
How big is the Luminometer RPi PCB?
The Luminometer RPi measures 75.3 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Luminometer RPi?
45 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Luminometer RPi design files?
From the czbiohub-sf/portable-luminometer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Luminometer RPi design in my own project?
Yes, under the terms of its BSD-3-Clause license, which czbiohub-sf chose for the repository.
More boards in portable-luminometer
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kSensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k