Qt py esp32-s2-assembled
d4vid-le·qt-py-esp32-s2-experiment·mockup/qt-py-esp32-s2-assembled.kicad_pcb
About the Qt py esp32-s2-assembled PCB
Qt py esp32-s2-assembled is an open source ESP32 PCB design by d4vid-le, published on GitHub. It is a 4-layer board measuring 17.8 × 20.7 mm, with 45 components from 26 distinct parts.
Its main chip is the ESP32-S2FN4R2, from the ESP32 family. Other key parts include the AP2112K-3.3. By type, the board carries 20 capacitors, 6 resistors, 3 crystals, 2 ICs, 2 transistors and 2 jumpers.
From the project
A personal, non-production experiment: reconstruct the Adafruit QT Py ESP32-S2 (Product 5325, Rev C) in KiCad from the authoritative Eagle source, measuring how accurately an AI agent can do it — and documenting every failure.
A personal, non-production experiment: reconstruct the Adafruit QT Py ESP32-S2 (Product 5325, Rev C) in KiCad from the authoritative Eagle source, measuring how accurately an AI agent can do it — and documenting every failure.
This is not affiliated with or endorsed by Adafruit. No boards are fabricated.
Read reports/gate0-inventory.md, reports/gate1-ground-truth.md, reports/gate1-u15-audit.md, and reports/gate2-schematic.md.
Main components on the Qt py esp32-s2-assembled
Qt py esp32-s2-assembled bill of materials (BOM)
45 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT23-5 | U1 |
| 1 | ESP32-S2FN4R2 | QFN56_7X7 | U$15 |
| 1 | BOOT0 | BTN_KMR2_4.6X2.8 | Q1 |
| 1 | reset | BTN_KMR2_4.6X2.8 | Q2 |
| 1 | ANTENNA_FP | ANT_2450AT18B100 | X1 |
| 1 | USB TYPE C | USB_C_CUSB31-CFM2AX-01-X | X6 |
| 1 | 40MHz | CRYSTAL_2X1.6 | Y1 |
| 1 | STEMMA_I2C_QTSKINNY | JST_SH4_SKINNY | CONN1 |
| 1 | TESTPOINT_MINUS_1X3MM | TESTPOINT_MINUS_1X3MM | GND0 |
| 2 | HEADER_1X7 | 1X07_CASTEL | JP1, JP3 |
| 2 | TPB1,27 | B1_27 | SWC1, SWC2 |
| 1 | TESTPOINT_PLUS_1X3MM | TESTPOINT_PLUS_1X3MM | VBAT0 |
| 1 | WS2812B_SK6805_1515 | SK6805_1515 | LED1 |
| 2 | NSR0320 | SOD-323_MINI | D1, D2 |
| 1 | 2nH | L_0402_1005Metric | L1 |
| 1 | 0 ohm | L_0402_1005Metric | L2 |
| 3 | 22uF | C_0805_2012Metric | C1, C6, C8 |
| 7 | 1uF | C_0402_1005Metric | C2, C3, C5, C13, C15, C19, C20 |
| 5 | 0.1uF | C_0402_1005Metric | C4, C10, C11, C12, C14 |
| 2 | TBD | C_0402_1005Metric | C7, C9 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100pF | C_0402_1005Metric | C16 |
| 2 | 16pF | C_0402_1005Metric | C17, C18 |
| 2 | 10K | R_0402_1005Metric | R1, R2 |
| 1 | 0 | R_0402_1005Metric | R3 |
| 2 | 5.1K | R_0402_1005Metric | R5, R6 |
| 1 | 1Meg | R_0402_1005Metric | R17 |
Qt py esp32-s2-assembled design files
The KiCad project lives in the d4vid-le/qt-py-esp32-s2-experiment repository on GitHub; these links point at the commit this page was built from.
Qt py esp32-s2-assembled: common questions
What microcontroller does the Qt py esp32-s2-assembled use?
The Qt py esp32-s2-assembled is built around the ESP32-S2FN4R2, from the ESP32 family.
How big is the Qt py esp32-s2-assembled PCB?
The Qt py esp32-s2-assembled measures 17.8 × 20.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Qt py esp32-s2-assembled?
45 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Qt py esp32-s2-assembled design files?
From the d4vid-le/qt-py-esp32-s2-experiment repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Qt py esp32-s2-assembled design in my own project?
The repository has no license, so all rights stay with d4vid-le. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Qt py esp32-s2-assembled without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in qt-py-esp32-s2-experiment
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k