Adapter
About the Adapter PCB
Adapter is an open source PCB design by dabridgham, published on GitHub. It is a 2-layer board measuring 29.2 × 67.3 mm, with 9 components from 6 distinct parts.
By type, the board carries 5 connectors and 4 resistors.
It belongs with the retro computing designs in this gallery.
From the project
QBUS Storage and I/O Card
Adapter bill of materials (BOM)
9 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power In | PJ-032B | J101 |
| 1 | Data in | Pin_Header_Straight_2x05 | P101 |
| 1 | Power Out | Socket_Strip_Straight_2x05 | P102 |
| 1 | Power In | Pin_Header_Straight_2x04 | P103 |
| 1 | Data Out | Socket_Strip_Straight_2x04 | P104 |
| 4 | 150Ω | R_0805 | R104, R105, R106, R107 |
Adapter design files
The KiCad project lives in the dabridgham/QSIC-verilog repository on GitHub; these links point at the commit this page was built from.
Adapter: common questions
How big is the Adapter PCB?
The Adapter measures 29.2 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adapter?
9 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adapter design files?
From the dabridgham/QSIC-verilog repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Adapter design in my own project?
The repository has no license, so all rights stay with dabridgham. Use it as a reference, and ask the author before reusing the design.
More boards in QSIC-verilog
Similar boards
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
MCL86jr
MicroCoreLabs
56.1 × 57.1 mm66 parts4LNo license532
24pin flex interposer
Wren6991
29 × 32 mm3 parts2LNo license508
Sram dev board
50 × 50 mm12 parts2LNo license508
TRS-80 Color Computer 3
baldengineer
280 × 155.3 mm204 parts2LCC-BY-4.0442
Commodore Plus 4
284.7 × 158.9 mm212 parts2LCC-BY-4.0442